Check the cooktop serial plate to see if the cooktop is approved for installation in mobile homes and/or recreational park trailers. Serial plate is located on the bottom of the unit.

If approved, the following items are applicable:

Mobile Homes

The installation of a range designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24 HUD, (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A, or with local codes.

In Canada the range must be installed in accordance with the current CSA Standard C22.1 -- Canadian Electrical Code Part 1 and Section Z240.4.1 -- Installation Requirements for Gas Burning Appliances in Mobile Homes (CSA Standard CAN/CSA -- Z240MH).

Recreational Park Trailers

The installation of a range designed for recreational park trailers must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI A119.5-latest edition.

In Canada the range must be installed in accordance with CAN/CSA -- Z240.6.2 -- Electrical Requirements for R.V.’s (CSA Standard CAN/CSA -- Z240 RV Series) and Section Z240.4.2 -- Installation Requirements for Propane Appliances and Equipment in R.V.’s (CSA Standard CAN/CSA -- Z240 RV Series).

Installation Of Appliance

The installation of this appliance must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1--Latest Edition, or, in Canada, CAN/CGA-B149 Installation Code, Latest Edition.

This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA No. 70--Latest Edition, or, in Canada, current CSA Standard C22.1 Canadian Electrical Code, Part 1.

In The Commonwealth Of Massachusetts

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

A “T” handle type manual gas valve must be installed in the gas supply line to this appliance.

A flexible gas connector, when used, must not exceed a length of three (3) feet / 36 inches.

All supply piping, except as noted, should use common National Pipe Thread (N.P.T.). For all pipe connections use an approved pipe joint compound resistant to the action of LP gas.

CAUTION: Warranty is void on Jenn--Air equipment installed other than as recommended by manufacturer.

This appliance is designed for use with the appliance gas pressure regulator supplied with this appliance. It must be installed in the gas line ahead of the gas manifold entrance. It is preset for use with natural gas and must be converted, as described on pages 8 and 9, for use with LP gas. (See figures 7 -- 12).

This appliance is designed to operate at a pressure of 5 inches of water column (36models), 4 inches of water column (30models) on natural gas or, if converted for use with LP gas (propane or butane), 10 inches water column. Make sure this appliance is supplied with and adjusted for the type of gas for which it is designed.

This appliance was adjusted at the factory for use with natural gas. If, at any time, this appliance is to be used with a different type of gas, all of the conversion adjustments described on pages 8 and 9 must be made by a qualified service technician before attempting to operate the cooktop on that gas. Natural gas should be supplied to the appliance pressure regulator at a line pressure between 6 and 14 inches of water column or, if converted for LP gas, between 11 and 14 inches.

WARNING

If the line pressure supplying the appliance pressure regulator exceeds 14water column (any gas), an external regulator must be installed in the gas line ahead of the appliance regulator to reduce the pressure to no more than 14water column. Failure to do this can result in malfunction and damage to the appliance.

Insure this appliance is adjusted for the type of gas supplied to it and that the gas supply pressure to the appliance regulator is within the proper pressure range.

SIf no other appliance is to be installed in the cabinetry below this unit, proceed as instructed under paragraph 1, page 4.

SIf this unit is to be installed over a Jenn--Air Model JJW9530, JJW9130, JJW8530 or JJW8130 Series Electric Wall Oven proceed as instructed under paragraph 2, page 5.

NOTE: In Canada, gas utilization codes prohibit use of street elbows. Use standard pipe elbows and make modifications to these instructions as necessary.

3

Page 3
Image 3
Jenn-Air JGC1430 & JGC1536 installation manual Mobile Homes, Recreational Park Trailers, Installation Of Appliance

JGC1430 & JGC1536 specifications

Jenn-Air is renowned for its high-quality kitchen appliances, and among its notable offerings are the JGC1430 and JGC1536 gas cooktops. Both models stand out for their performance, elegance, and innovative features, catering to both everyday cooks and culinary enthusiasts.

The Jenn-Air JGC1430 is a 30-inch gas cooktop that combines functionality with style. It features four sealed burners, providing a variety of heat output options to accommodate different cooking needs. The two high-output burners are perfect for quickly boiling water or searing meats, while the two lower-output burners ensure even simmering for delicate sauces. The cooktop’s continuous cast-iron grates allow for smooth movement of pots and pans across the surface, enhancing the cooking experience.

On the other hand, the JGC1536 offers a 36-inch surface area, perfect for larger kitchens or those who require more cooking capacity. This model features five sealed burners, including dual burners that enable precision cooking with a wide range of heat settings. The additional burner provides flexibility when preparing multiple dishes simultaneously. Like the JGC1430, the JGC1536 is equipped with continuous grates and sturdy construction, ensuring durability and ease of use.

Both cooktops boast the innovative Jenn-Air performance technologies. The powerful flame technology delivers robust heat, allowing for efficient cooking and consistent results every time. The appliances also feature precise simmer settings, providing the ability to maintain low heat for extended cooking, which is ideal for sauces and delicate dishes. The oven-like design of the burners enhances heat distribution, ensuring that food is cooked evenly.

Another standout feature of both models is the easy-to-clean design. The sealed burners prevent spills from leaking underneath, while the smooth surface allows for effortless wiping down after cooking. Additionally, the sleek stainless steel finish adds a modern aesthetic to any kitchen.

Safety is a significant consideration in Jenn-Air design as well. Both models include features such as electronic ignition and flame failure detection, ensuring that the burners will automatically shut off if the flame is lost, providing peace of mind during use.

In conclusion, the Jenn-Air JGC1430 and JGC1536 gas cooktops exemplify the brand's commitment to quality, performance, and user-friendly design. With their powerful burners, innovative technology, and stylish aesthetics, these models are ideal choices for anyone looking to elevate their cooking experience.