Paradyne manual Installing the GranDSLAM 4200 Into a Rack

1. Installation

Installing the GranDSLAM 4200 Into a Rack

wo types of mounting screws are provided. Use:

T#10-32 mounting screws for rails with threaded screw holes

#12-24 mounting screws and self-retaining nuts for rails with unthreaded screw holes

NOTE:

Before installing the GranDSLAM 4200 in a rack or cabinet, you may prefer to first attach the unit to a ground while you have unrestricted access to the grounding lug on the side of the unit. See Grounding Lug in Chapter 2, Cabling for more information.

Procedure

To install the GranDSLAM 4200 into a rack:

1.Determine where in the rack you will mount the GranDSLAM 4200. If your rack does not have threaded screw holes, slip self-retaining nuts onto the rails where the GranDSLAM 4200 will be fastened.

02-17070

2.Place the unit so that the brackets rest against the front of the rails. Insert screws in the bottom screw positions and hand-tighten them.

1-8 October 2002 4200-A2-GN20-10