Paradyne GranDSLAM 4200 manual Using the CLI

October 2002

4200-A2-GN20-10

RTRV-HDR:TL1-Agent::100::;

Command listing. If you begin typing a command, then press the Tab key, the CLI cycles through all the commands that contain the characters you have just typed.

For example, enter:

RTRV-PROFILE

Press the Tab key, the CLI displays:

RTRV-PROFILE-ADSLALM

Press the Tab key again, the CLI displays:

RTRV-PROFILE-ADSLDNALMPress the Tab key again, the CLI displays:

RTRV-PROFILE-ADSLDN

T

Automatic completion of optional fields. Pressing the Tab key while entering a command causes the CLI to fill in the optional fields.

For example, enter:

RTRV-HDR

Press the Tab key, the CLI fills in the TID:

RTRV-HDR:TL1-Agent

Press the Tab key twice again, the CLI fills in the delimiters:

RTRV-HDR:TL1-Agent::

Press the Tab key again, the CLI fills in the CTAG:

RTRV-HDR:TL1-Agent::100

Keep pressing the Tab key to fill in the rest of the command delimiters:

RTRV-HDR:[TID]::[CTAG];

the CLI expands it to:

RTRV-H

For example, if you enter:

Automatic command completion. You need to type only enough of a command to make it unique, then type a question mark (?) and the CLI then completes the command.

TL1 offers the following features to help you with command entry:

T

he GranDSLAM 4200 uses Transaction Language No. 1 (TL1) language for CLI commands and messages. These commands and messages are used to configure and maintain the system. See the GranDSLAM 4200 ATM Stackable DSLAM User’s Guide for detailed information about the CLI.

4. Configuration

Using the CLI

4-2