Paradyne GranDSLAM 4200 manual Grounding Lug

2. Cabling

Grounding Lug

Procedure

To connect the unit to a ground:

1.Strip back the insulation approximately 5/16 of an inch (8 mm) on 14 AWG copper ground wire.

2.Loosen the screw on the grounding lug located on the side panel near the front of the unit.

3.Insert the stripped end of the wire through the bottom of the grounding lug and tighten the screw. Ensure that the screw makes contact with the stripped portion of the wire.

4.Attach the ground wire to an earth ground.

RTN -
48VDC	3.5 A
B		60
A
POWER	A	B

ALARM CONSOLE

BITS MGMT

TSPU TANIL SUK

LAET MRTS

4202
E1	MODULE

TX

75Ω RX

120Ω

1	4	8
			12
13	16	20
			24

DSL PORTS 1-24

POTS 1-24

02-17270

4200-A2-GN20-10 October 2002 2-15