Paradyne GranDSLAM 4200 manual Management Port

2. Cabling

Management Port

The MGMT (management) port can be used to connect the GranDSLAM 4200 to a network management system using a 10BaseT or 100BaseT LAN. The MGMT port is isolated and no user data is accessible over it. A straight-through cable is used.

Procedure

To use the MGMT port:

1.Connect a modular 8-pin cable to the MGMT port.

2.If the GranDSLAM 4200 is in a rack, fasten the cable to a rail with a cable tie.

3.Connect the other end of the cable to your Ethernet hub or to a network interface card in a PC.

Hub Device

	RTN -
B	48VDC	3.5 A 60		ALARM
A				CONSOLE
	POWER	A	B		SUT KNI ATS LPU
				BITS
				MGMT	MRLA TSE T	4202		TX
						E1	MODULE	75W	RX

120W

MGMT

Port

1	4
		8	12
13	16
		20	24

02-17278

4200-A2-GN20-10 October 2002 2-9