Paradyne GranDSLAM 4200 manual Configuring the Unit for Operation

4. Configuration

6.Change the time, if necessary. The Simple Network Time Protocol (SNTP), which maintains the unit’s clock, defaults to enabled. However, you can change the time offset from Coordinated Universal Time (UTC) using the TZOFFSET parameter of the SET-NE-ALLTL1 command. See the GranDSLAM 4200 ATM Stackable DSLAM User’s Guide for more information.

Configuring the Unit for Operation

Once the unit is connected to the network, the following turn-up procedures should be performed:

Change the login and password using the ED-USER-SECUTL1 command from the defaults SUPERUSER, ASN#1500.

Change the SNMP community strings using the EMS.

Optionally, you may also choose to do the following using the EMS:

TConfigure the syslog server at the NOC. Configure the trap managers.

4200-A2-GN20-10 October 2002 4-5