Paradyne manual Installing the GranDSLAM 4200 on a Wall

1. Installation

Installing the GranDSLAM 4200 on a Wall

Wall mounting requires two wood screws suitable for the weight of the fully cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm) diameter screws in 3/4-inch (19 mm) plywood (not drywall).

Procedure

To install the GranDSLAM 4200 on a wall:

1.Identify the flat-head screws provided in the hardware kit and the brackets suitable for a 19-inch rack. Two screws are required for each bracket.

2.Orient the unit so that the bottom is facing you and the faceplate is at the top.

3.Locate the supplied Right Side mounting bracket and fasten it to the right side of the unit.

02-17252

4.Locate the supplied Left Side mounting bracket and fasten it to the left side of the unit.

5.Tighten all screws firmly.

1-10 October 2002 4200-A2-GN20-10