To Delay Start Self-Clean:
1.Press CLEAN.
2.“REMOVE RACKS” will be displayed. Remove the racks.
3.Select CONTINUE using the Quickset pad.
4.Set LIGHT soil level by entering “200” using the number pads for 2 hours of cleaning time.
OR
Select MEDIUM for a moderately soiled oven and 3 hours of cleaning time.
OR
Select HEAVY for a heavily soiled oven and 4 hours of cleaning time.
The door will lock. “CLEAN,” “TIME,” “LOCKED” and the cleaning time countdown will be displayed
5.After door locks, press MORE OPTIONS.
6.Select DELAY using the Quickset pad.
7.Select the number of hours you want to delay the start of the
The delay time and cleaning time will be displayed.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire range is cool. These spills may affect the finish.
Cleaning Method:
■Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad:
Gently clean around the model and serial number plate because scrubbing may remove numbers.
■
See “Assistance or Service” section to order.
STAINLESS STEEL (on some models)
To avoid damage to stainless steel surfaces, do not use soap- filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel- wool pads, gritty washcloths or abrasive paper towels.
Cleaning Method:
Rub in direction of grain to avoid damaging.
■Stainless Steel Cleaner and Polish Part Number 31462 (not included):
See “Assistance or Service” section to order.
■Liquid detergent or
Rinse with clean water and dry with soft,
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool, abrasive cleansers or oven cleaner.
To avoid damage, do not soak knobs.
When replacing knobs, make sure knobs are in the Off position.
Do not remove seals under knobs.
Cleaning Method:
■Warm, soapy water:
Pull knobs straight away from control panel to remove.
CONTROL PANEL
To avoid damage to the control panel, do not use abrasive cleaners,
Cleaning Method:
■Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on panel.
■
See “Assistance or Service” section to order.
25