INSTALLATION

Leveling

CAUTION

To protect personal property and refrigerator from damage, observe the following:

•Protect vinyl or other flooring with cardboard, rugs, or other protective material.

•Do not use power tools when performing leveling procedure.

To enhance the appearance and maintain performance, the refrigerator should be level.

Note

•Complete any required door reversal, panel installation and/or a water supply connection, before leveling.

Materials Needed

•3⁄8” hex head driver

•Carpenter’s level

1. Remove toe grille.

• Grasp firmly and pull bottom outward to unclip.

2.Remove bottom hinge cover(s).

•Place the eraser end of a pencil or similar blunt tool in the cover notch.

Notch

Location

• Use slight pressure to pry the cover loose.

• Continue to maintain downward pressure to the notched side of the cover while swinging it off.

3.Using hex head driver, turn both of the front adjustment screws (A) clockwise to raise and counterclockwise to lower the front of the refrigerator.

A BB A

4.Turn both rear adjustment screws (B) clockwise to raise and counterclockwise to lower the rear of the refrigerator.

5.Using the carpenter’s level, make sure front of refrigerator is 1⁄4” (6 mm) or 1⁄2 bubble higher than back of refrigerator and that the refrigerator is level from side to side.

6.If required, correct rocking of refrigerator by turning rear adjustment screw clockwise to raise rocking corner. If doors are uneven, do the following:

•Determine which door needs to be raised.

•Turn front roller

adjustment screw (A) clockwise to raise front corner of door.

•If one refrigerator door has reached the limit of its adjustment range and doors are still not level, lower the opposite door by turning roller adjustment screw counterclockwise.

•Check with level to verify 1⁄4” tilt to the back for proper door closure.

•If refrigerator is aligned and stable, replace toe grille and hinge covers.

7.Replace hinge cover(s).

•Position cover into the outer edge of the hinge.

•Swing the cover toward the cabinet and snap it into place.

8.Replace the toe grille.

Note

•For proper reinstallation, ensure the “top” marking on the interior of the toe grille is oriented correctly.

•Align the toe grille mounting clips with the lower cabinet slots.

•Push the toe grille firmly until it snaps into place.

9

Page 9 Page 11
Page 10
Image 10
Jenn-Air JSD2789HEB, JSD2789HEW, JSD2789HES, 12842108 important safety instructions Leveling, BB a
Page 9 Page 11

JSD2789HEW, JSD2789HEB, JSD2789HES, 12842108 specifications

Jenn-Air, a brand renowned for its innovation and high-end appliances, presents its impressive side-by-side refrigerators: the models 12842108, JSD2789HES, JSD2789HEB, and JSD2789HEW. Each of these refrigerators embodies the brand's commitment to luxury and performance, offering a host of features that cater to modern culinary needs.

One of the standout features across these models is the smart storage system designed to enhance organization. Adjustable spill-proof shelves provide flexibility for taller items, while gallon door bins offer easy access to condiments and drinks. The clear bins and crisper drawers, designed to maintain optimal humidity for fruits and vegetables, ensure that food remains fresh longer.

The cooling technology integrated into these refrigerators features Dual Cooling System, which uses separate cooling systems for the refrigerator and freezer compartments. This design prevents the transfer of odors and maintains ideal humidity levels. Additionally, the adaptive defrost feature optimizes energy use by only running the defrost cycle when necessary.

In terms of convenience, the models are equipped with an ice and water dispenser located on the front door. This feature provides filtered ice and water, promoting healthier hydration while minimizing the need for bottled water. Moreover, the filtration system ensures that the water meets high-quality standards, enhancing both taste and safety.

Energy efficiency is another significant aspect of these Jenn-Air refrigerators. With ENERGY STAR certification, they are designed to consume less energy than standard appliances, translating to savings on utility bills while reducing environmental impact.

Aesthetic appeal is not overlooked; these models boast a sleek stainless steel finish that complements any kitchen décor. The integrated design provides a seamless appearance, enhancing modern interiors while optimizing space.

Additionally, the electronic controls and LED lighting provide ease of use and visibility, allowing you to access your favorite items with minimal effort. With thoughtful touches and advanced technologies, the Jenn-Air refrigerators 12842108, JSD2789HES, JSD2789HEB, and JSD2789HEW represent a perfect combination of style, performance, and innovation, making them an invaluable addition to any home. Whether you’re a cooking enthusiast or someone who values convenience, these models are designed to elevate your kitchen experience.
Top Page Image Contents