Jenn-Air JSD2789HEW, JSD2789HES Dispenser Control select models, Dispenser Lock select models

ICE AND WATER

Dispenser Control (select models)

(control features vary by model)

Ice Dispenser Operation

To Dispense Ice and Water:

•Select Water, Crush or Cube mode by pushing button on dispenser control panel. A green light above button indicates mode selection.

•Press container against dispenser pad.

When dispensing crushed ice, hold container as close to chute as possible to reduce spraying.

Notes

•Mode may not be changed while ice dispenser is in operation.

•If dispenser is active for more than five minutes, an automatic lock out sensor will shut down power to dispenser area. See Dispenser Lock for unlocking information.

Dispenser Lock (select models)

The Dispenser Lock prevents ice or water from being dispensed.

To Lock Dispenser:

•Press and hold the Lock button for three seconds. A green indicator light above button will illuminate when the dispenser is locked.

To Unlock Dispenser:

•Hold the Lock button for three seconds. The green indicator light above button will go out.

Water Filter Status Indicator Light (select models)

The Water Filter Status Indicator Light serves as a reminder to replace the water filter. A green light indicates that the filter is in good condition. A red light indicates the filter should be changed. Once light turns red, it will remain red until function is reset.

	To Reset Indicator:
	• Press and hold both the Lock and Water
	buttons simultaneously for four seconds. The
	green filter status indicator light will flash
	three times when the function has
19	successfully reset.

Auto Light (select models)

The Auto Light function activates the dispenser light at half-power when the Light Sensor detects that the light levels in room are low.

To Activate Auto Light:

•Press Auto Light button. A green indicator light above button illuminates when the sensor is active.

To Deactivate Auto Light:

•Press Auto Light button. The green indicator light will go out.

Note

•When the dispenser pad is activated, the dispenser light will operate when Auto Light is ON or OFF.

Sabbath Mode (select models)

When activated, the Sabbath Mode deactivates the control lights while leaving the control operational.

To Activate Sabbath Mode:

•Press and hold the Lock and Auto Light buttons simultaneously for three to four seconds. After three to four seconds, the dispenser lights will turn off.

To Deactivate Sabbath Mode:

•Press and hold both the Lock and Auto Light buttons simultaneously for three to four seconds. After three to four seconds, the dispenser lights will activate.

Notes

•Dispenser light will not activate during dispensing while in this mode.

•If the power fails, the control will remain in Sabbath Mode when power returns.

Express Fill™ Button (select models)

The Express Fill™ Button works independently of the dispenser controls, providing an up-front alternative to the dispenser pad for dispensing water. This feature is convenient for filling large items that will not fit into the dispenser area (i.e. sport bottles, pitchers, large pans, coffee pots).

This feature allows added convenience of dispensing ice and water simultaneously. To use, choose your preferred ice mode from dispenser control panel. Press container against dispenser pad while pressing the Express Fill Button.