FRESH FOOD FEATURES

Shelves

CAUTION

To avoid personal injury or property damage, observe the following:

•Never attempt to adjust a shelf that is loaded with food, except in the case of the ElevatorTM Shelf.

•Confirm shelf is secure before placing items on shelf.

•Handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.

Your refrigerator has either Spill-Catcher™ or non- sealed shelves. Spill-Catcher™ shelves have a spill retainer edge which allows for easier clean up and some are equipped with a slide out feature. To slide out (select models), grasp the front of the shelf and pull forward. Push in the shelf to return to the original position.

To Remove a Shelf:

• Slightly tilt up the front and lift up the rear of the shelf, then pull the shelf straight out.

To Lock the Shelf Into Another Position:

•Tilt up the front edge of the shelf.

•Insert the hooks into the desired frame openings and let the shelf settle into place.

•Be sure the shelf is securely locked at the rear.

The Crisper Top serves as the lower fresh food shelf.

To Remove the Crisper Top:

•Place hand under the frame to push up the glass. Lift glass out.

To Install:

• Repeat above instructions in reverse order.

Elevator™ Shelf (select models)

The Elevator™ Shelf is equipped with a spill-retaining edge and the EasyGlide™ slide-out feature. It can be adjusted up or down without unloading.

To Slide Out Elevator™ Shelf:

•Grasp the front of the shelf and pull forward.

•Push the shelf in to return to original position.

To Adjust the Elevator™ Shelf:

•Pull out the knob on the crank handle.

•Rotate the crank clockwise to raise the shelf, and counterclockwise to lower the height of the shelf.

To Remove Elevator™ Shelf:

•Completely unload the shelf and pull the shelf forward.

•Pull until the shelf stops.

•Press up on the tabs located underneath its outside edges and continue pulling forward until the shelf is clear of the frame.

To Replace Elevator™ Shelf:

•Align the shelf to the frame and push it all the way back. It is not necessary to press up on the tabs for reinstallation.

In ordinary use, the Elevator™ Shelf frame assembly does NOT require removal. Though unlikely, and not recommended, the correct removal procedure is as follows:

To Remove Frame Assembly:

•Unload the shelf completely.

•Slide the shelf forward about 2” and manually move the two rear latches toward the shelf center.

•While supporting the entire shelf and frame from underneath, lift slightly and rotate the assembly approximately 30° to allow the rear mechanism to clear the vertical rear side rails.

•The entire assembly can then be moved forward and clear of the refrigerator compartment.

To Reinstall Frame Assembly:

•Reverse the removal procedure. Be sure the shelf is in a level position. When the sliding shelf is pushed to the rear, it will reposition the rear latches to their correct operating position.

(style may vary)

13

Page 13 Page 15
Page 14
Image 14
Jenn-Air JSD2789HEB, JSD2789HEW, JSD2789HES, 12842108 Fresh Food Features, Shelves, Elevator Shelf select models
Page 13 Page 15

JSD2789HEW, JSD2789HEB, JSD2789HES, 12842108 specifications

Jenn-Air, a brand renowned for its innovation and high-end appliances, presents its impressive side-by-side refrigerators: the models 12842108, JSD2789HES, JSD2789HEB, and JSD2789HEW. Each of these refrigerators embodies the brand's commitment to luxury and performance, offering a host of features that cater to modern culinary needs.

One of the standout features across these models is the smart storage system designed to enhance organization. Adjustable spill-proof shelves provide flexibility for taller items, while gallon door bins offer easy access to condiments and drinks. The clear bins and crisper drawers, designed to maintain optimal humidity for fruits and vegetables, ensure that food remains fresh longer.

The cooling technology integrated into these refrigerators features Dual Cooling System, which uses separate cooling systems for the refrigerator and freezer compartments. This design prevents the transfer of odors and maintains ideal humidity levels. Additionally, the adaptive defrost feature optimizes energy use by only running the defrost cycle when necessary.

In terms of convenience, the models are equipped with an ice and water dispenser located on the front door. This feature provides filtered ice and water, promoting healthier hydration while minimizing the need for bottled water. Moreover, the filtration system ensures that the water meets high-quality standards, enhancing both taste and safety.

Energy efficiency is another significant aspect of these Jenn-Air refrigerators. With ENERGY STAR certification, they are designed to consume less energy than standard appliances, translating to savings on utility bills while reducing environmental impact.

Aesthetic appeal is not overlooked; these models boast a sleek stainless steel finish that complements any kitchen décor. The integrated design provides a seamless appearance, enhancing modern interiors while optimizing space.

Additionally, the electronic controls and LED lighting provide ease of use and visibility, allowing you to access your favorite items with minimal effort. With thoughtful touches and advanced technologies, the Jenn-Air refrigerators 12842108, JSD2789HES, JSD2789HEB, and JSD2789HEW represent a perfect combination of style, performance, and innovation, making them an invaluable addition to any home. Whether you’re a cooking enthusiast or someone who values convenience, these models are designed to elevate your kitchen experience.
Top Page Image Contents