Connect Water Supply

Read all directions before you begin.

IMPORTANT:

Plumbing shall be installed in accordance with the International Plumbing Code and any local codes and ordinances.

Use copper tubing or Whirlpool supply line, Part Number 8212547RP, and check for leaks.

Install tubing only in areas where temperatures will remain above freezing.

Tools needed

Gather the required tools and parts before starting installation:

Flat-blade screwdriver

⁷⁄₁₆" and ¹⁄₂" open-end wrenches or two adjustable wrenches

¹⁄₄" nut driver

NOTE: Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

Connecting the Water Line

1.Turn off main water supply. Turn on nearest faucet long enough to clear line of water.

2.Using a ¹⁄₂" copper supply line with a quarter-turn shutoff valve or the equivalent, connect the ice maker as shown.

NOTE: To allow sufficient water flow to the ice maker a minimum ¹⁄₂" size copper supply line is recommended.

A

B

A.Bulb

B.Nut

3.Now you are ready to connect the copper tubing. Use ¹⁄₄" (6.35 mm) OD soft copper tubing for the cold water supply.

Ensure that you have the proper length needed for the job. Be sure both ends of the copper tubing are cut square.

Slip compression sleeve and compression nut on copper tubing as shown. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

A B

C

A. Compression sleeve

C. Copper tubing

B. Compression nut

 

4.Place the free end of the tubing into a container or sink, and turn on main water supply and flush out tubing until water is clear. Turn off shutoff valve on the water pipe.

NOTE: Always drain the water line before making the final connection to the inlet of the water valve to avoid possible water valve malfunction.

5.Bend the copper tubing to meet the water line inlet which is located on the back of the ice maker cabinet as shown. Leave a coil of copper tubing to allow the ice maker to be pulled out of the cabinet or away from the wall for service.

REAR VIEW

A

B

C

D

A. Water supply tube clamp

B. Vent hose (drain pump models only)

C. Inlet water tube clamp and supply line connector

D. Drain hose (drain pump models only)

6.Remove and discard the short, black plastic tube from the end of the water line inlet.

7.Thread the nut onto the end of the tubing. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

NOTE: To avoid rattling, be sure the copper tubing does not touch the cabinet’s side wall or other parts inside the cabinet.

A

B

C

D

A. Line to ice maker

 

C. Ferrule (purchased)

B. Nut (purchased)

 

D. Supplied line from ice maker

8.Install the water supply tube clamp around the water supply line to reduce strain on the coupling.

9.Turn shutoff valve ON.

10.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

7

Page 7
Image 7
Jenn-Air W10282143B manual Connect Water Supply, Connecting the Water Line, Rear View

W10282143B specifications

The Jenn-Air W10282143B is a high-performance appliance that exemplifies the brand's commitment to innovation and quality in kitchen technology. Designed to cater to the needs of modern culinary enthusiasts, this model integrates advanced features and functionalities that simplify meal preparation while enhancing cooking experiences.

One of the standout features of the Jenn-Air W10282143B is its high-efficiency cooling system. This system ensures that food items are stored at optimal temperatures, preserving freshness for an extended period. The unit is also equipped with adjustable shelving, allowing users to customize the interior layout to accommodate various food items, from large platters to delicate produce. This versatility is a significant advantage for households with diverse storage needs.

Technologically, the Jenn-Air W10282143B incorporates smart connectivity features. Through Wi-Fi integration, users can control the appliance remotely via a dedicated app. This means you can adjust settings, receive alerts, and even monitor energy usage from your smartphone. This level of control and convenience is ideal for busy individuals and families who are always on the go.

Another key characteristic of the Jenn-Air W10282143B is its sleek and modern design. The appliance features a stainless-steel exterior that not only enhances its aesthetic appeal but also provides superior durability and easy maintenance. Fingerprint-resistant finishes prevent smudges and keep the surface looking clean and polished, contributing to a tidy kitchen environment.

In terms of energy efficiency, the Jenn-Air W10282143B meets stringent industry standards. It is designed to consume less electricity compared to traditional models, making it an environmentally friendly choice that helps to reduce utility bills without compromising performance.

Safety features are paramount in this design. The model includes automatic shut-off capabilities and safety locks, providing peace of mind for households with children or pets. Furthermore, the intuitive control panel is user-friendly, allowing everyone in the household to operate the appliance with ease.

Overall, the Jenn-Air W10282143B is a perfect blend of style, functionality, and smart technology. With its user-centric design and commitment to performance, it stands out as a reliable kitchen companion for anyone looking to enhance their culinary journey. The combination of innovative features and an elegant aesthetic makes this model a valuable addition to any modern kitchen.