Hitachi 36SDX88B manual Connecting a Stereo Laserdisc Player or DVD Player to Input

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2.

1.Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the PC color ready TV set below.

2.Connect the cable from the PB/CB OUT or B-Y OUT of the Laserdisc or the DVD player or SET-TOP BOX to the INPUT 2 (PB/CB) jack, as shown on the PC ready color TV set below.

3.Connect the cable from the PR/CR OUT or R-Y OUT of the Laserdisc or the DVD player or SET-TOP BOX to the INPUT 2 (PR/CR) jack, as shown on the PC ready color TV set below.

4.Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player or SET-TOP BOX to the INPUT 2 (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player or SET-TOP BOX to the INPUT 2 (AUDIO/L) jack.

6.Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or DVD player or SET-TOP BOX. The mode VIDEO:2 disappears automatically after approximately eight seconds.

7.Press the INPUT button to return to the previous channel.

R - AUDIO - (MONO) / L VIDEO S-VIDEO

COMPONENT

VIDEO

PR/CR PB /CB Y

INPUT

2

CR CB Y L R

OUTPUT

BACK OF DVD PLAYER

(OR)

PR P B Y L R

OUTPUT

HDTV SET-TOP BOX

NOTE: Completely insert the cable connection when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose.

See Page 14 for TIPS ON REAR PANEL CONNECTIONS.

19