INSTALLATION INSTRUCTIONS
Install Cooktop in the Cabinet
Follow the manufacturer’s recommended instructions for installing your downdraft cooktop with the downdraft blower exhaust scroll turned straight down.
To rotate the blower exhaust scroll down, complete the following steps.
Rotate Blower
IMPORTANT: The following additional steps must be performed if the cooktop is being installed in a peninsula or island cabinetry.
The blower exhaust scroll is shipped from the factory set to exhaust straight out the back of the cabinet through an exterior wall.
NOTE: There are two different styles of blowers. See the following illustrations.
Blower Style A - With Top Label
D
E
C | E |
AB
F
A. Blower exhaust scroll | D. Top label |
B. Plenum | E. |
C. Blower motor | F. Motor mounting plate |
To rotate blower:
1.Locate the 4 plastic plugs in the plenum bypass.
2.Use the pliers to remove the plastic plugs.
IMPORTANT: Do not throw away the plastic plugs. The plastic plugs must be reinstalled after the blower exhaust scroll has been rotated.
A | E |
| |
B |
|
C | D |
| |
A. Blower motor | D. Blower bypass |
B. Exhaust scroll | E. Plastic plugs (4) |
C.Plenum
3.Insert the ³⁄₈" socket and extension into the hole and use the ratchet handle to loosen the nut half of a rotation. Repeat this process for each of the 4 nuts.
4.With the nuts loosened, the blower exhaust scroll can be easily rotated downward.
Blower Style B - Without Top Label
5. Retighten each nut with the ³⁄₈" socket, extension and ratchet.
B
6. Reinstall the 4 plastic plugs.
B
C
| D |
A | E |
| |
A. Blower exhaust scroll | C. Plenum |
B. | D. Motor mounting plate |
| E. Blower motor |
3