To rotate blower motor (blower style A only):
NOTE: The “Top” label location on the blower motor is at the 9 o’clock position.
1.Using a ratchet with a ³⁄₈" socket and supporting the motor with one hand, remove the 4 machine nuts that attach the blower motor to the exhaust scroll.
2.Remove the blower motor and wheel assembly from the weld studs.
D
A
B 
C | E |
A. Top label | D. Weld stud location |
B. Blower motor | E. Blower wheel |
C. Motor mounting plate
3.When the motor mounting plate clears the threaded weld studs, rotate the assembly clockwise 90° and reinstall the 4
4.Verify the “Top” label is positioned as shown.
A 
A. Top label
Prepare the Base Cabinet Bottom
Installation of the
Remove Cabinet Brace
1.Open the cabinet doors.
2.Determine if a wooden or plastic brace is attached to the cabinet floor and to the back of the center mullion as shown in the following illustration.
A
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| B |
|
|
|
|
|
D |
|
|
|
|
| C | ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A. Brace | C. 3" (7.6 cm) |
B. 2½" (6.4 cm) | D. Floor |
3.If a wooden or plastic brace is installed, remove the brace.
Cabinet Floor Cutout
The installation of the
The poster board template provided with the kit is universal. However, the actual location of the exhaust cutout is different between the 30" (76.2 cm) and 36" (91.4 cm) products, due to the length difference between the base cabinets. The sketches that follow show the general position of the template.
For a 30" (76.2 cm) base cabinet: The template will be located in the front left corner. Note the area to be cut out of the cabinet floor is in the
Top View of Cabinet
E
D
|
|
|
|
|
|
|
|
|
| C | |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| B |
|
|
| ||||
|
|
|
|
|
| A |
|
|
|
|
|
|
|
| A. Front of cabinet |
|
|
| D. Template | ||||
|
|
| B. Area to be cut out |
|
|
| E. Left side of cabinet | ||||
|
|
| C. Toe kick |
|
|
|
|
| |||
4
