INSTALLATION REQUIREMENTS

Tools and Parts

TOOLS NEEDED:

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

■

Cordless drill

■

Tape measure

■

¹⁄₈" Drill bit

■

Level

 

 

■

Phillips screwdriver

Additional Tools Needed (Style 2 - Overlay only):

■ Scissors

■ Scribe

■Pencil

PARTS NEEDED (Style 2 - Overlay only):

■Custom Overlay Drawer Panels — See “Custom Overlay Drawer Panels.”

■Hardware

PARTS SUPPLIED:

■ Hooks (8)

■ Screws (16)

■Overlay plates (4)

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator drawer(s).

Failure to do so can result in death, explosion, or fire.

NOTES:

■For the refrigerator drawers to be flush with the front of the base cabinets remove any baseboards or moldings from the rear of the opening. See “Product Dimensions” and later in this section “Opening Dimensions (both styles).”

■It is recommended that you do not install the refrigerator drawers near an oven, radiator, or other heat source.

■Do not install in a location where the temperature will fall below 55°F (13°C).

Opening Dimensions (both styles)

■Height dimensions are shown with the leveling legs extended to the minimum height of ¹⁄₄" (6.35 mm) below the refrigerator drawers.

NOTE: When leveling legs are fully extended to 1" (25 mm) below the refrigerator drawers, add ³⁄₄" (19.05 mm) to the height dimensions. See “Product Dimensions.”

■If the floor of the opening is not level with the kitchen floor, shim the opening to make it level with the kitchen floor.

14³⁄₄"

(37.5 cm)

A

34³⁄₈" (87.3 cm) min.

 

35" (88.9 cm) max.

¹⁄₂"

(1.3 cm)

24"

(60.96 cm) min.

B

24" (60.96 cm) min.

Critical Dimensions:

A. 14³⁄₄" (37.5 cm) utility opening

B. 24" (60.96 cm) minimum opening width

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator drawers into the final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator drawers be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

IMPORTANT: If this product is connected to a GFCI (Ground Fault Circuit Interrupter) equipped outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Food quality and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of it.

5

Page 4 Page 6
Page 5
Image 5
Jenn-Air W10549548A manual Installation Requirements, Tools and Parts, Location Requirements, Electrical Requirements
Page 4 Page 6

W10549548A specifications

The Jenn-Air W10549548A represents the pinnacle of modern kitchen innovation, offering a range of features that elevate culinary experiences. This appliance, primarily recognized for its function as a powerful and efficient kitchen component, combines state-of-the-art technologies with a sleek design to fit seamlessly into any contemporary kitchen aesthetic.

One of the standout features of the Jenn-Air W10549548A is its intuitive Smart Oven technology. This technology allows users to control the oven remotely via a smartphone app, making it easier to preheat, adjust settings, and monitor cooking progress from anywhere in the house. The app is user-friendly and compatible with both iOS and Android devices, adding convenience to everyday cooking.

The oven comes equipped with advanced convection cooking capabilities, ensuring even heating throughout the cooking process. This feature allows for consistent results whether you are baking, roasting, or broiling. The convection fan circulates hot air around the food, enhancing the cooking process and reducing cook time, which is a significant advantage for busy households.

Another impressive characteristic is the precision temperature probe, which enables users to achieve perfect doneness for meats and poultry. The probe monitors the internal temperature, allowing chefs to have full control over their cooking and helping to prevent overcooking.

The W10549548A also features a self-cleaning option, saving users time and effort in maintaining the oven's cleanliness. This function uses high heat to burn off any residues, leaving behind only ash that can be easily wiped away. Additionally, the appliance boasts a modern touch control panel that simplifies operation. The illuminated display offers clear visibility, and the responsive touch controls allow for quick adjustments to settings.

Energy efficiency is a significant consideration in the design of the Jenn-Air W10549548A. It meets energy-saving standards that not only contribute to sustainability but also reduce utility bills, making it an environmentally conscious choice.

In summary, the Jenn-Air W10549548A is designed with the modern chef in mind, offering a blend of advanced technology, user-friendly features, and energy efficiency. Its smart capabilities, convection cooking, precision temperature probe, and self-cleaning function make it an invaluable asset in today’s culinary landscape. This appliance is not just about cooking; it’s about enhancing the overall cooking experience, ensuring that every meal is a success.
Top Page Image Contents