




3.Turn on the external audio device.

4.To select auxiliary audio input, press the FUNCTION button to select AUX mode.

5.The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.

NOTE:

 If you connect this unit to the Line-Out Jack of your external device then you only need to adjust the volume control of this unit. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting.

 Press the POWER button to turning off the unit when you finish listening. Don't forget to switch off the power of your external device as well.

RESETTING

If the system does not respond or exhibits erratic or intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal microcontroller to shut down automatically. If this occurs, simply disconnect the AC adaptor and remove the system backup battery, wait for at least 3 minutes and then setup the unit again as if it is a brand new unit.

CARE AND MAINTENANCE

1.Do not subject the unit to excessive force, shock, dust or extreme temperature.

2.Do not tamper the internal components of the unit.

3.Clean your unit with a dry cloth. Solvent or detergent should never be used.

4.Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

5.Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.

CLEANING THE UNIT

To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.

The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts.

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet.

If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.

CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.

6

Page 13
Image 13
Jensen JIMS-125I user manual Resetting, Care and Maintenance, Cleaning the Unit