Jensen JiMS-190 owner manual Care and Maintenance, Resetting the Unit

CARE AND MAINTENANCE

-Do not subject the unit to excessive force, shock, dust or extreme temperature.

-Do not tamper the internal components of the unit.

-Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.

-Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

-Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.

Resetting the Unit

If the unit is subject to a power surge or electric shock, it is possible that the internal micro-controller may lock up and the unit will not respond to any commands from the top panel controls or remote control. 1.In this event, unplug and then reconnect the AC power plug into the wall outlet.

2.Use a straightened paper clip, toothpick or similar objects to press the RESET button located on the bottom of the main unit (see the below figure). The reset operation clears the system memory and all of your previous settings will be erased. CAUTION: DO NOT USE SHARP, POINTED OBJECT TO PRESS

THE RESET BUTTON. IT MAY DAMAGE THE RESET SWITCH INSIDE THE UNIT.

RESET button

12