RADIO OPERATION (Continued)
To Preset Channels
This Radio is equipped with 10 preset memories for AM and 20 preset memories for FM. Once they are preset, they can be instantly accessed by keying in the preset channel using the Numeric Buttons or pressing the 5 or 6 Buttons on the Remote Control.
1.Press Button to turn on the unit.
2.Press the FUNCTION Button to switch the unit into radio mode.
3.Press the BAND Button to select AM or FM band as desired.
4.Tune to a desired station.
5.Press the MEMORY Button. Channel Indicator "01" appears and blinks.
6.While the Channel Indicator is blinking, press the 5 or 6 Buttons to select the desired preset channel.
7.Press the MEMORY Button again to confirm when the desired preset channel appears in the Display.
8.Tune to another station and repeat steps 5 to 7 to store a new station in another preset channel.
To Receive Preset Stations
1.Press Button to turn on the unit.
2.Press the FUNCTION Button to operate the unit in the radio mode.
3.Press the BAND Button to select the AM or FM band as desired.
4.Press the 5 or 6 Buttons or key in the preset channels using the NUMERIC Buttons to select the preset channels.
Note: HD RadioTM Multicast Channels (HD2, HD3, etc) can be added to the preset memory locations for easy access, but there may be a delay before sound is heard when accessing the channels from memory. See the section below "Special Information about Delay in the HD RadioTM System" for more information on why this delay occurs.
HD RadioTM Multicast Channels (FM Only)
Together with digital sound quality, HD RadioTM technology gives broadcasters the opportunity to offer more than one programming channel simultaneously using their existing frequency on the radio tuning buttons.
If the HD RadioTM Receiver recognizes an HD Radio channel, the HD logo starts blinking until the signal is tuned in. After the HD RadioTM Receiver is tuned to an HD channel, CH1 will indicate the existence of multicast services. Use the 5 or 6 Buttons to select the multicast channels (i.e. CH2).
If you are listening to an HD RadioTM Multicast Channel (HD2, HD3, etc) and turn the radio power off or switch to either iPod or Aux modes, the radio will default back to the main
- 10 -