Jensen JISS-300I user manual Listening to Your iPod/iPhone

 After all the programmed tracks have been played, the player stops but the programmed tracks remain in the memory.

 Press the PROGRAM Button followed by the PLAY/PAUSE Button to begin programmed playback again.

7.To cancel programmed play, in Stop mode press the STOP ■ Button once or open the CD DOOR.

8.To turn the CD player off, set the FUNCTION selector to STANDBY/AUX position. The LCD backlight will go off.

LISTENING TO YOUR iPod/iPhone

1.Gently push the iPod/iPhone compartment door to open it. The door will automatically open.

2.Place your iPod/iPhone into the docking port by placing the connector on the bottom of the iPod/iPhone onto the connector in the docking bay. When the system is powered by AC, iPod/iPhone battery charging will start automatically even if the Dock is in standby mode.

Note: (1). Please be careful when seating the iPod/iPhone into the docking to avoid damaging the 30-pin connector on the iPod/iPhone or in the Docking System. Dock your iPod/iPhone carefully into the 30-pin connector and then close the door.

(2). The iPod/iPhone will only be charged when the System is powered by AC.

3.Close the iPod/iPhone compartment door, set the FUNCTION selector to the iPod/iPhone position, the LCD backlight will light and display the message “iP”.

4.Press the PLAY/PAUSE button to start play back.

5.Select the previous or next music tracks by pressing the B-SKIP  or F-SKIP  Buttons repeatedly, and press the PLAY/PAUSE Button to play or pause.

Note: The System’s LCD will not show any music information (e.g. song name) for your iPod/iPhone. Please view the music information through your iPod/iPhone display.

6.Adjust the sound level using the VOLUME control.

Note: The volume level cannot be adjusted using the volume control on your iPod after docking.

7.To remove the iPod/iPhone from the unit, press and hold the PLAY/PAUSE Button on the System for a few seconds to switch off the device, open the iPod/iPhone compartment door and then gently remove it from the dock connector.

8.To turn the iPod/iPhone mode off, set the FUNCTION selector to STANDBY/AUX position. The LCD backlight will go off.

iPod/iPhone playback control:

 Press the iPod/iPhone PLAY/PAUSE button to pause or resume the iPod/iPhone playback;

 Press the SKIP or buttons to skip to the next or previous song;

 Press and hold the SKIP or buttons for fast-forwarding or fast-rewinding during playback.

 From the remote, press the MENU button, ENTER button and / buttons on the remote

10