Jensen JMC-326 On Protection Against Laser Energy Exposure, On Placement, On Condensation

Models: JMC-326

1 16
Download 16 pages 5.41 Kb
Page 4
Image 4
ON PROTECTION AGAINST LASER ENERGY EXPOSURE

CAUTION

Follow the advice below for safe operations.

ON PROTECTION AGAINST LASER ENERGY EXPOSURE

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing.

Stop operation immediately if any liquid or solid object should fall into the cabinet.

Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly.

Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is still open.

If the unit is not to be used for a long period of time, make sure that all power sources are disconnected from the unit. Unplug the AC adaptor from the wall outlet. Make it a practice to remove the AC cord by grasping the main body and not by pulling the cord.

This unit employs a laser. The use of controls or adjustment or performance of procedures other than those specified here may result in exposure to hazardous radiation.

ON PLACEMENT

Do not use the unit in places which are extremely hot, cold, dusty or humid.

Place the unit on a flat and even surface.

Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by covering it with a cloth or by placing it on a carpet.

ON CONDENSATION

When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit.

When there is condensation inside the unit, the unit may not function normally.

Let it stands for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.

Should any trouble occurs, remove the power source and refer servicing to qualified personnel.

3

Page 4
Image 4
Jensen JMC-326 instruction manual On Protection Against Laser Energy Exposure, On Placement, On Condensation