Jensen MP8610BT owner manual Middle Range MID, Treble, Loud, Subwoofer

Models: MP8610BT

1 61
Download 61 pages 20.59 Kb
Page 16
Image 16

Operation (continued)

Audio Menu (continued)

Middle Range (MID)

When in the Mid range menu, use the left () or right () joystick button to select the Middle Range parameter you would like to adjust.

LEVEL: Use the up (+) or down (-) joystick button to adjust the Middle Range level from “-6” to “+6”.

C.FREQ: Use the up (+) or down (-) joystick button to adjust the Middle Range center fre- quency (C.FREQ) to “500Hz”, “1KHz”, “1.5KHz”, or “2.5KHz”.

MID-Q: Use the up (+) or down (-) joystick button to adjust the Middle Quality Factor to “2N”, “1N”, “1W” or “2W”.

NOTE: For quick access to “MID” once inside the Audio menu, press RPT/3.

Treble

When in the Treble menu, use the left () or right () joystick button to select the desired Treble parameter you would like to adjust.

LEVEL: Use the up (+) or down (-) joystick button to adjust the Treble level from “-6” to “+6”.

C.FREQ: Use the up (+) or down (-) joystick button to adjust the Treble center frequency (C.FREQ) to “10KHz”, “12.5KHz”, “15KHz”, or “17.5KHz”.

NOTE: For quick access to “Treble” once inside the Audio menu, press RDM/4.

Loud

When in the Loud menu, use the up (+) or down (-) joystick button to turn the loudness “ON” or “OFF”. Once Loud is turned “ON”, use the left () or right () joystick button to select the desired Loudness parameter you would like to adjust:

LEVEL: Use the up (+) or down (-) joystick button to adjust the loudness level to “Low” (+6dB), “Mid” (+10dB) or “High” (+15dB).

P. FREQ: Use the up (+) or down (-) joystick button to adjust the loudness Peak Frequency (P. FREQ) to “400Hz”, “800Hz” or “2.4KHz”.

BOOST: Use the up (+) or down (-) joystick button to adjust the Boost mode to “Flat” or “On” mode.

NOTE: For quick access to “Loud” once inside the Audio menu, press F-/5.

Subwoofer

The Subwoofer control is only applicable if a subwoofer is connected to the unit.

When in the Sub-W menu, use the up (+) or down (-) joystick button to turn the sub-woofer “ON” or “OFF”. Once the Subwoofer option is turned on, use the left () or right () joystick button to select the desired Subwoofer parameter you would like to adjust:

LEVEL: Use the up (+) or down (-) joystick button to adjust the Sub-woofer level from “0” to ”12”.

LPF: Use the up (+) or down (-) joystick button to adjust the Low Pass Filter (LPF) to “Flat”, “80Hz”, “120Hz” or “160Hz”.

NOTE: For quick access to ‘Sub-W’, once inside the Audio menu, press F+/6.

MP8610BT

Audio Control / Regulador Audio / Contrôleur Audio

1

2

3

4

5

6

7

8

9

16

Page 16
Image 16
Jensen MP8610BT owner manual Middle Range MID, Treble, Loud, Subwoofer