Bluetooth Operation (continued)

Telephone Menu (TEL-MENU) (continued)

Speed Dial (continued)

Previewing the Speed Dial List

Press the TEL-MENUbutton (28) three times to display the “Speed Dial List” .

Use the up (+) or down (-) joystick buttons to navigate through the 10 Speed Dial numbers on the list.

Press either the AUDIO button (4) or the PHONE button (25) to dial the number selected from the list.

Clearing the Speed Dial List

Select the number you want to delete from the list, press and hold the CLEAR button (26) for more than 3 seconds to remove the number.

Editing the Speed Dial List

Select the number you want to edit from the list, then press the AUDIO button (4) to enter the editing interface.

Phone Book (Mobile/SIM Card)

1.Press the TEL-MENUbutton (28) four times to display “Phone book on Mobile” on the LCD or five times to display “Phone Book on SIM Card” on the LCD. The LCD will display “Reading” while downloading the data from the mobile phone.

2.Once the download is completed, you can use the up (+) or down (-) joystick buttons to navigate through the list. One phone book entry is downloaded at a time.

3.Press the up (+) or down (-) joystick buttons to download the next entry.

4.Press either the AUDIO button (4) or the PHONE button (25) to dial the number selected from the list.

NOTE: Some mobile phones, like Nokia, do not support Phone Book upload through Bluetooth. In this case, the LCD Display will display “ No Info”.

Auto Answer

Press the TEL-MENUbutton (28) six times to access the “Auto Answer” function. The default setting is “off”.

If “Off” is selected, you must press the PHONE button (25) to answer an incoming call.

If “On” is selected, the unit will automatically answer the incoming call after three seconds.

Incoming Call Ringing Volume

Press the TEL-MENUbutton (28) seven times to access the “Ringing Volume Level” function. You can pre-set the Ringing Volume level for any incoming call.

The default Ringing Volume level is “20”. Press the up (+) or down (-) joystick buttons to adjust the level from a minimum of “00” to a maximum of “38”.

Incoming Call Blinking Mode

Press the TEL-MENUbutton (28) eight times to access the “Incoming call backlight on/off” function. The default setting is “off”. When “On” is selected, there is no ring tone for incoming calls – the LCD backlight will blink when a call comes in.

52

MP8610BT

Phone book - H/P searching date from H/P

Phone Book-H/P phone book Empty

Phone Book-H/P phone book No Information

Phone Book-Moblie

Phone book - H/P searching date from Card

Phone Book-Card phone book Empty

Phone Book-card phone book No Information

Phone Book-Card

Page 52
Image 52
Jensen MP8610BT Phone Book Mobile/SIM Card, Auto Answer, Incoming Call Ringing Volume, Incoming Call Blinking Mode