DVD/VCD Video Operation

UV10

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally.

Controlling Playback

To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD is playing. Touch the 1/2 button to view a second page of controls

•VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available if PBC is on.

Sectional Repeat Function (A-B)

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (1). The unit beeps and then opens.

Closing the TFT Screen

Press the OPEN button (1) again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing.

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins.

1/2 MENU

Stopping Playback

	AUDIO
	A-B
	SUB-
	TITLE
TITLE	2/2 DISP

Use the A-B function to define a specific area of a disc to repeat.

•Press the REPT A-Bbutton (6) on the remote control (or the A-B button on screen) to set the start point (A) of the repeated section.

•Press the REPT A-Bbutton again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously.

•Press the REPT A-Bbutton again to cancel the A-B section setting and stop repeat play.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “Rating Sub-menu Features” on page 9).

You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (6) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (6) on the unit or remote control (35) to reset the loading mechanism.

Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button (10) on the front panel or remote control (8).

Touch the stop button ( ) on the screen or press the >/ BAND button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the play/pause button (>) on the screen or press the >/ button on the remote control (18) to suspend or resume disc play.

Slow Motion Playback

Press the << button (22) on the remote control or the << button on the screen to play the current title in slow motion. Keep pressing and releasing the button to increase the rate from “x2” to “x4”, “x8”, and “x20”.

Press >/ (16) on the remote control or touch the on-screen play button (>) to resume normal play.

Fast Forward Playback

Press the >> button (14) on the remote control or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “x2” to “x4”, “x8”, and “x20”.

Press >/ (18) on the remote control or touch the on-screen play button (>) to resume normal play.

Repeat Playback

Press the RPT button (7) on the remote control or the button on screen to alter repeat mode according to the following:

•DVD: Repeat Chapter, Repeat TItle, Repeat Off

main DVD menu. Use the directional (arrow) buttons on the remote control to select a title from the menu or touch the title on screen.

Press the TITLE button (2) on the remote control or on screen to select a different title for playback.

Press the >/ button (18) on the remote control or press the rotary encoder (11) to confirm your selection and begin playback. You can also select a title using the touch screen.

Moving Through Chapters

Press the >> button (19) on the remote control or the >> button on screen to advance to the next chapter on the DVD.

Press the << button (17) on the remote control or the << button on screen to move to the previous chapter.

Goto Search

During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc:

1.Press the GOTO button (21) on remote control to access the “Search” screen.

2.Press the >> or << buttons (14, 22) on the remote control to select a category (highlighted in yellow).

Jensen UV10 instruction manual DVD/VCD Video Operation

Models: UV10