UV10
| Table 7: Troubleshooting | |
|
|
|
Problem | Cause | Corrective Action |
|
|
|
|
|
|
Disc does not play back | Disc is warped or scratched | Use disc in good condition |
| Disc is dirty or wet | Clean disc with soft cloth |
|
|
|
| Laser pickup is dirty | Clean laser pickup with cleaning disc |
|
|
|
| Incompatible disc is used | Use compatible disc |
|
|
|
| Disc rating exceeds Parental Lock rating limit | Change Parental Lock settings to lower restriction |
|
|
|
| Disc region code is not compatible with unit | Use disc with proper region code |
|
|
|
| Disc is inserted upside down | Insert disc with label side up |
|
|
|
PBC cannot be used during VCD playback | PCB is not available on the disc |
|
|
|
|
No repeat or searching while playing VCD | PCB is on | Turn PCB off |
|
|
|
MP3 |
|
|
|
|
|
Interruption occurred during playback | Disc is dirty or scratched | Clean disc or replace |
|
|
|
| File is damaged/bad recording | Recreate disc with good files |
|
|
|
Incorrect playback message displayed | Message is longer than LCD can display |
|
|
|
|
Error Messages |
|
|
| Table 8: Error Messages | |
|
|
|
Message Displayed | Cause | Corrective Action |
|
|
|
|
|
|
Loading | Disc is being read |
|
|
|
|
No Disc | Disc is dirty | Clean disc with soft cloth |
|
|
|
| Disc is upside down | Insert disc with label side up |
|
|
|
| Disc not present in loading compartment | Insert disc |
|
|
|
Bad Disc | Disc is dirty | Clean disc with soft cloth |
|
|
|
| Disc is upside down | Insert disc with label side up |
|
|
|
Unknown disc | Disc format is not compatible with this unit |
|
|
|
|
Region Error | DVD is not compatible with region code of unit |
|
|
|
|
Error | Illegal mechanism operation | Press EJECT key for 5 seconds to reset loading mechanism |
|
|
|
Care and Maintenance
1.Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non- neutral detergent (such as alcohol) may result in scratching or discoloration.
2.Do not get water or cleaning fluids on the unit.
3.If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
4.Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects.
5.Do not attempt to use a 3” (8 cm)
6.The CD player may not operate properly in extreme hot or cold. If such conditions occur, allow the interior of the
vehicle to reach a normal temperature before using player.
7.When the vehicle warms up during cold weather or under damp conditions, condensation may appear on the LCD panel. Should this occur, the screen will not operate properly until the moisture has evaporated.
8.We suggest you use a cleaning disc in this unit more frequently than in the unit in your home due to the environmental conditions of the vehicle.
25
