Jensen VM9021TS instruction manual Preparation, Features, Tools and Supplies

VM9021TS

PREPARATION

Congratulations on your purchase of the Jensen VM9021TS Mobile Multimedia AM/FM/DVD Receiver.

It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9021TS installed by a reputable installation shop.

Features

DVD

•Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, SVCD, VCD, MPEG1, MPEG2, MPEG4, AVI and JPEG

•Region 1 playback

•16:9 Aspect ratio- Wide / Normal / Cinema

•Front panel DVD control

•High-speed Fast Forward / Fast Rewind 2X, 4X, 8X, 32X

•Play, Pause, Stop, Slow

•Chapter Up / Down

•MultiZone output 'Kid-Zone'

•Wolfson Microelectronics high performance 24-bit, 192 kHz DAC supports 6-channel and 2-channel "Down-Mix” audio modes

•16MB high-speed flash memory - 80nS access time

•2 second ESP (Electronic Skip Protection)

Integrated SD Card Reader

•Compatible formats: MP3, WMA, AVI, MPEG1, MPEG2, MPEG4 and JPEG

•Supports up to 2GB SD card

MP3/WMA

•GIGA MP3 - Store up to 999 MP3 files on a DVD

•ID3-tag compatible

•Direct track access

•Play, Pause, Stop, Track Up / Down

•60 second (MP3), 120 second (WMA) ESP - Electronic Skip Protection

CD

•CD-text compatible

•4 second ESP (Electronic Skip Protection)

AM/FM Tuner

•User-selectable frequency spacing

•30 Station presets (18FM/12AM) JENSEN Plus Tuner II

Outboard Media Module

•Input adapter for TV Tuner, XM and iPod

TV Tuner (Included)

•VHF 2-13

•UHF 14-69

•TV antenna (3.5mm antenna included)

•F-Connector/Coaxial Antenna Input (optional)

XM Ready

•Requires optional Terk XMD1000 tuner box

•Requires optional Terk XMDJEN100 or Jensen JXMC XM cables

•Advanced display shows the artist, song title, and XM channel and category at a glance

•Direct channel entry

Navigation Ready

•Requires optional NAV100 navigation module

jLink Ready

•Controls and charges all iPod's except "Shuffle"

•Displays all text information including category, track name, artist and channel number

Chassis

•6.5 inch TFT touch screen LCD - 280,800 pixels (1200W X 234H)

•TSD - Touch Screen Display menu control

•Fully automatic motorized TFT LCD flip-down

•16-step TFT LCD tilt adjustment

•Beep Tone confirmation

•2.0 Din

•Import/ISO/DIN mountable

•Heat management system - Incorporates forced air- cooling to keep the chip-sets operating at nominal temperatures

•Heavy duty galvanized chassis

Multi-ZONE

•Allows front passengers to listen to the radio while rear passengers listen to a CD, MP3, WMA or watch DVDs

General

•Full function infrared remote control

•Limited function infrared "Kid Zone" remote

•OSD - On Screen Display menu control

•High-performance audio processor

•Electronic volume, bass, treble, balance and fader

•Bass center frequency adjustment - 60, 80, 100, 130, 150 and 200Hz

•Bass Q factor - 1.0, 1.25, 1.5 and 2.0

•Treble center frequency adjustment - 10, 12.5, 15 and 17kHz

•Subwoofer crossover - 80, 120 and 160Hz

•Subwoofer Phase - 0 - 180 degrees

•Subwoofer level - variable

•22 watt center channel amplifier

•Center channel speaker output (JCCSPK sold separately)

•100-ohm low impedance pre-amp outputs, all channels

•5V Peak / 2V RMS RCA outputs, all channels

•1-pair front RCA outputs and 1-pair rear/surround RCA outputs

•Single Subwoofer RCA output

•Center Channel RCA pre-amp output (variable)

•1-pair headphone/Multi-ZONE RCA outputs

•1-pair auxiliary RCA A/V inputs

•Back-up camera input with reverse override

•1 NTSC composite video output for additional screens

•NTSC Multi-ZONE composite video for additional screens

•Flex Fader

•Joystick menu navigation

Tools and Supplies

You will need these tools and supplies to install your VM9021TS:

•Torx type, flat-head and Philips screwdrivers

•Wire cutters and strippers

•Tools to remove existing radio (screwdriver, socket wrench set or other tools)

•Electrical tape

•Crimping tool

•Volt meter/test light

•Crimp connections

•18 gauge wire for power connections

•16 – 18 gauge speaker wire

WARNING! Only connect the unit to a12-volt power supply with proper grounding.

WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for rear-view video camera) never use the video display function while driving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit without the assistance of a professional. For details, please consult your local car stereo specialty shop.

WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water.

1