VM9021TS

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.

WARNING! Do not change the fuse on the power wire without professional guidance. Using an improper fuse may cause damage to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually.

Optional Accessories

iAUX3 READY (Sold Separately)

Can connect to any portable media device or multimedia device using a standard 3.5mm plug

Converts 3.5mm auxiliary input to RCA stereo outputs for easy connection to the radio’s AUX inputs

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation.

NOTE: If the VM9021TS is to be installed in a vehicle equipped with an on-board drive or navigation computer, DO NOT disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.

2

Page 6
Image 6
Jensen VM9021TS instruction manual Disconnecting the Battery, IAUX3 Ready Sold Separately