Jensen VM9411 instruction manual DVD/VCD Video Operation

DVD/VCD VIDEO OPERATION

VM9411

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking break is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN (1) button. The unit beeps and then open.

Closing the TFT Screen

Press the OPEN (1) button again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing. Once the TFT screen is closed, the LCD panel displays the current status.

DVD LCD Display

312

1.Current Playing Chapter

2.Current Playback Time

3.SC - Scan Playback; RPT - Repeat Playback; RDM - Random Playback; ALL - Playback All Discs

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered disc play begins. If the TFT screen is closed, the DVD indicator appears lit on the LCD screen.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “RATING (Parental Lock) Menu” on page 24).

You cannot insert a disc if there is already a disc in the unit.

NOTE: DVD-R and DVD-RW will not play unless the recording session is closed and the DVD is finalized.

Ejecting a Disc

Press the button (21) on the front panel or remote control

(25)to eject the disc. The unit automatically reverts to Tuner mode.

This unit is equipped with Keyless Disc Eject, allowing you to eject a disc with the power off. The unit remains off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (21) on the front panel or remote control (25) to reset the loading mechanism. Normal operation resumes.

Controlling Playback

Stopping Playback

Press the 6/STOP button (13) on the front panel or the / BAND button (20) on the remote control to stop DVD play.

To resume playback, press the joystick ENTER button (20) on the front panel or the >/ button on the remote control (18).

Pausing Playback

Press the joystick ENTER button (20) on the front panel or the >/ button on the remote control (18) to suspend or resume disc play.

Slow Motion Playback

Press the V button (19) on the joystick to play the current title in slow motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press >/ (18) to resume normal play.

Fast Forward

Press the >> button (14) on the remote control or the /\ button

(18)on the joystick to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.

Repeat Playback

Press the 4/REP button (11) on front panel or the REPT button (7) on remote control to alter repeat mode according to the following:

•DVD: Repeat Title, Repeat Chapter, Repeat Off

•VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to repeat.

•Press the REPT A-Bbutton (6) on the remote control to set the start point (A) of the repeated section.

•Press the REPT A-Bbutton again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously.

•Press the REPT A-Bbutton again to cancel the A-B section setting and stop repeat play.

Random Playback

With a DVD, VCD, or CD playing, press the 5/RDM button

(12)on the front panel or the RDM button (33) on the remote control to activate random playback and play all chapters/ tracks in random order. “Shuffle On” appears on the screen.

Press the >> button (19) on the remote control or the > button on the joystick (17) to play the next random track.

Press the RDM button again to turn random play off. “Shuffle Off” appears on the screen.

NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the main DVD menu. Use the directional (arrow) buttons (<, >, /\

&V) on the joystick (16, 17, 18, 19) to select a title from the menu.

Press the TITLE button (2) on the remote control to select a different title for playback.

Press the >/ button (18) on the remote control or the joystick ENTER button (20) to confirm your selection and begin playback.

Moving Through Chapters

Press the >> button (19) on the remote control or the > button on the joystick (17) to advance to the next chapter on the DVD.

Press the << button (17) on the remote control or the < button on the joystick (16) to move to the previous chapter.

Alternating Between 2-Channel and 6- Channel Mode

Press and hold the 5/RDM button (12) on the front panel to switch between 2-channel (DownMix Mode) and 6-channel (Full 6CH Mode) speaker output. 2-channel mode is available for:

•AM/FM tuner

•XM

•iPod

•TV tuner

20