Jensen VM9412 operation manual DVD/VCD Video Operation

VM9412

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if

Controlling Playback

To access the on-screen controls, touch the screen. Touch the 1/2 button to view a second page of controls

NOTE: For VCD play, the repeat function is not available if PBC is on.

Sectional Repeat Function (A-B)

applicable, will operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (1). The unit beeps and then opens.

Closing the TFT Screen

Press the OPEN button (1) again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing.

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins.

BACK

1/2 MENU

Stopping Playback

EQ	BACK
	AUDIO
	A-B
	SUBTITLE
TITLE	2/2 DISP

Use the A-B function to define a specific area of a disc to repeat.

•Press the RPT A-Bbutton (6) on the remote control (or the A-B button on screen) to set the start point (A) of the repeated section.

•Press the RPT A-Bbutton again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously.

•Press the RPT A-Bbutton again to cancel the A-B section setting and stop repeat play.

Random Playback

With a DVD, VCD, or CD playing, press the RDM button on the control panel (21) or remote control (33) to activate

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 6-digit code must be entered and/or the disc must be authorized (see “General Sub-menu Features” on page 16).

You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (21) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (21) on the unit or remote control (35) to reset the loading mechanism. Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button (15) on the front panel or remote control (8) until “DISC” appears at the bottom of the screen.

Touch the stop button ( ) on the screen or press the / BAND button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the pause button () on the screen (or press the >/ button on the remote control) to suspend disc playback. Press the > button on the screen to resume disc playback.

Fast Forward Playback

Press the /\ button on the joystick or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”.

Press the joystick enter button (18) on the remote control or touch the play button (>) to resume normal playback.

Fast Reverse Playback

Press the \/ joystick button or touch the << button on the screen to play the current title in fast reverse. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”.

Press the joystick ENTER button (18) on the remote control or touch the play button (>) to resume normal playback.

Repeat Playback

Press the RPT button (19) on the control panel, the RPT

button (7) on the remote control, or the button on screen to alter repeat mode according to the following:

•DVD: Repeat Chapter, Repeat Title, Repeat Off

•VCD (PBC Off): Repeat Single, Repeat Off

random playback and play all chapters/tracks in random order. “On” appears on the screen.

Press the > button on the joystick to play the next random track.

Press the RDM button again to turn random play off.

NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the main DVD menu. Use the joystick to select a title from the menu or touch the title on screen.

Press the TITLE button (2) on the remote control or on screen to select a different title for playback.

Press the ENTER (joystick) button to confirm your selection and begin playback. You can also select a title using the touch screen.

Moving Through Chapters

Press the > button on the joystick or the >> button on screen to advance to the next chapter on the DVD.

Press the < button on the joystick or the << button on screen to move to the previous chapter.

22