XA4200, XA4300
2CH/3CH/4CH
The XA4200/XA4300 can be configured for three different input modes: 4 channel, 3 channel or
2 channel.
4 Channel
2CH When the input selector is set to
3CH 4 CH, the amplifier will operate as
4CH
a standard 4 channel amp with all RCA inputs connected.
INPUT OUTPUT | INPUT OUTPUT |
REAR | FRONT |
®
2 Channel
2CH When the input selector is set to
3CH 2 CH, the amplifier is configured for
4CH
bridged stereo operation. The amplifier will need a two channel input even though there are four inputs. In the 2 CH the following inputs will be used:
INPUT OUTPUT | INPUT OUTPUT |
REAR | FRONT |
3 Channel
2CH When the input selector is set to
3CH 3 CH, the amplifier is configured for
4CH
stereo/mono operation. The front channels of the amplifier operate in stereo mode. The rear channels of the amplifier are internally bridged for mono operation. In 3 CH the following RCA inputs will be used:
INPUT OUTPUT | INPUT OUTPUT |
REAR | FRONT |
Note
Although the above illustrations indicate the low level input being used, the same connections would apply to the high level input.
INPUT OUTPUT | INPUT OUTPUT |
REAR | FRONT |
High Inputs
11
5910 XA4CH_E.p65 | 11 | 01/23/01, 12:24 PM |
