®
Location and Mounting
The XA amplifier’s compact design allows greater flexibility in mounting. It can be mounted under a seat or in the trunk.
When selecting a location, remember that amplifiers generate heat. Select a location where air can circulate around the amplifier. Do not cover the amplifier with carpets or enclose it behind interior trim panels. Do not mount the amplifier in an inverted or upside down configuration. Every installation will be a bit different based upon vehicle design. Check all locations and placements carefully before making any cuts or connections.
Important
Allow air circulation around the amplifier.
4
XA4200, XA4300
Routing Wires
Battery
|
| Battery | |
|
| Connector | |
| Fuse or |
| |
| Circuit |
| |
| Breaker | Grommet | |
|
| ||
|
| To prevent | |
|
| damage to | |
|
| power wire | |
Receiver |
| ||
RCA Cables | Power Antenna | Power Wire | |
(8 gauge | |||
| |||
(18 gauge wire) | wire or | |
larger) | ||
| ||
Speakers |
|
Amplifier
Ground Screw
Drill 1/8" hole in
chassis sheet metal
Use the same ground if using multiple amplifiers
Important
If wiring connections are made wrong, the unit will not operate properly and it could be damaged. Follow the installation instructions carefully, or have the installation handled by an experienced technician.
5910 XA4CH_E.p65 | 4 | 01/23/01, 12:24 PM |
