Introduction

This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance procedures for model DC-1100 Series Dust Collectors. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance to instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our website: www.waltermeier.com.

Specifications

Base Machine (All Models)

 

Model

DC-1100

Stock Number

708636

Blower Wheel Diameter

11

Sound Rating at 3 feet

70-80 db

Hose Diameter

4" & 6”

Air Flow (CFM)

1,100

Velocity at 4” (FPM)

8,464

Static Pressure (inch of water)

11

Overall Dimensions

37"L x 28"W x 79"H

Motor (TEFC)

1-1/2 HP, 1Ph 115/230V 115V Prewired

Net Weight (approx.)

103 lbs.

Bag Filter Kit

 

Stock Number

708636F

Bag Diameter

20"

Collector Bag Capacity (cu. ft.)

5.6

Canister Filter Kit

 

Stock Number

708639B

Bag Diameter

20"

Collector Bag Capacity (cu. ft.)

5.6

Remote Control Unit

 

Stock Number (main unit and remote control switch) (115V only)

708636C

Stock Number (Remote Control Switch only)

708636T

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior notice, without incurring obligations.

Ordering Replacement Parts

Replacement parts are listed in the back of this manual. To order parts or reach our service department, call 800-274-6848, Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

6

Page 6
Image 6
Jet Tools DC-1100CK operating instructions Introduction Specifications, Ordering Replacement Parts