Jet Tools DC-1100CK Unpacking, Shipping Content, Hardware Bag for Base Unit

Unpacking

The table below lists the shipping cartons that are included with the models of the DC-1100 Dust Collector.

1.Locate your particular model and verify that you have received the all the correct cartons.

2.Check contents of each carton against the ship- ping content listings on this and the following page.

3.Report any damage to your distributor.

4.Do not discard any shipping material until after the dust collector has been assembled and is running properly.

	Base Unit (SN 708636)	Filter Bag Kit (SN 708636F)	Canister Filter Kit (SN 708639B
DC-1100	x	x
DC-1100CK	x		x

Table – DC-1100 Dust Collector cartons

Hardware Bag for Base Unit

(SN DC1100-HP)

16 – M8 x 16 Hex Cap Screws (K)

22 – M8 Flat Washers (L)

8 – M6 x 12 Pan Head Flange Screws (M) 6 – M8 Hex Nuts (N)

Assembly Hardware

Shipping Content

Base Unit

(SN 708636)

1 – Housing (A)

2 – Hose Clamps (B)

1 – Hose (C)

1 – Impeller (Motor/Fan Assembly) (D)

1 – Inlet Port (E)

1 – Impeller Cover (F)

3 – Support Legs (G)

1 – Base (H)

4 – Casters (J)

1 – Owner's Manual (not shown)

1 – Warranty Card

1 – Hardware Bag (SN DC1100-HP)

Base Machine Shipping Contents

7