Jet Tools operating instructions Introduction Specifications, JJ-6CSX JJ-6CSDX

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for\ Models JJ-6CSX and JJ-6CSDX Jointers. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

Model		JJ-6CSX	JJ-6CSDX
Stock Number – Bed and Stand Kit		................................ 708457K	.............................................708457DXK
Stock Number – Bed Assembly	.......................................	708457J	............................................. 708457DXJ
Stock Number Stand		708457S	.............................................708457DXS
Cutting Capacity		6-1/16"W x 1/2"D	.................................... 6-1/16"W x 1/2"D
Cutterhead Speed		4800 RPM	............................................... 6000 RPM
Number of Knives		3	.............................................................. 3
Rabbeting Capacity		1/2"	..........................................................1/2"
Rabbet Ledge		3-1/8" x 8-3/4"	......................................... 3-1/8" x 8-3/4"
Table Surface	7-1/4"W x 45-3/4"L x 31-1/4"H		...................... 7-1/4"W x 56"L x 31-1/4"H
Fence		3-7/8"H x 29-1/8"L	...................................3-7/8"H x 32-3/4"L
Blade Size		6-1/16" x 5/8" x 1/8"T	............................ 6-1/16" x 3/4" x 5/64"T
Fence Tilts Right		45º	...........................................................45º
Positive Stops		45º, 90º	................................................... 45º, 90º
Motor		115/230V, 60Hz, 1HP, 1Ph	115/230V, 60Hz, 1HP, 1Ph
...........................................................
...............................................................................		Prewired 115V	........................................ Prewired 115V
Net Weight (approx.)		215 lbs.	.................................................... 237 lbs
Shipping Weight		230 lbs.	.................................................... 258 lbs

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7