39.Move the hands in an alternate motion from back to front as the work continues through the cut. Never pass the hands directly over the cutter knife. As one hand approaches the knives remove it from the stock in an arc motion and place it back on the stock in a position beyond the cutter knife (Fig. 2).

40.At all times hold the stock firmly.

41.Do not use this jointer for other than it intended use. If used for other purposes, WMH Tool Group disclaims any real or implied warranty and holds itself harmless for any injury or damage which may result from that use.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

- - SAVE THESE INSTRUCTIONS - -

On-Off Switch Padlock

The jointer is equipped with a push-button

 

switch that will accept a safety padlock (see

 

figure – not included). To safeguard your

 

machine from unauthorized operation and

 

accidental starting by young children, the use of

 

a padlock is highly recommended. JET model

 

BP-1 (Stock No. 709012) is available from your

 

local authorized JET distributor or by calling

 

JET Equipment & Tools at the phone number on

Model BP-1 On-Off Switch Padlock

the cover of this manual.

 

6

Page 6
Image 6
Jet Tools JJ-6CSX, JJ-6CSDX operating instructions On-Off Switch Padlock