Receiving
Open both shipping containers and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents of Shipping Containers
Container One
1 Stand with motor
Container Two
1Saw body
1
1Belt cover
1Trunnion support bracket
1Table
2Table lock knobs
1Table pin
1Table insert
1Fastener package (see fastener page)
1Instruction manual
1Warranty card
Tools Required for Assembly
3/8" to 1" combination wrench set and adjustable wrench
#1 and #2 cross point screwdrivers
Assembly
Exposed metal surfaces, such as the table, have been given a protective coating. This should be cleaned with a soft cloth and solvent, such as kerosene. Do not use an abrasive pad, and do not get solvents on plastic parts.
1.Remove belt cover from inside of stand.
2.Place cabinet stand upright on a level surface. If desired, the stand can be further stabilized by securing it to the floor with lag screws through the inside corner holes. If using a mobile base, lock the casters before assembling or operating the band saw.
3.With the aid of a second person, lift the saw body out of the shipping container and place onto stand top. Be sure front of saw (with JET logo) faces stand front (JET logo).
11
