S T E P 2 0
Place cargo side panel onto a flat surface with back side up. Locate back side of storage compartment. Carefully grind heads of plastic spot welds to allow removal of compartment enclosure. Take care not to damage front of panel.
S T E P 2 1
Remove storage compartment from side panel.
S T E P 2 2
Using provided grill as a guide, mark the required grill open- ing onto the side cargo panel with grease pencil or masking tape. Cut out opening to allow fitment of grill with maximum open area.
S T E P 2 3
Position provided grille template on front of side of cargo panel so as to cover storage pocket opening and, align with horizontal ridges below. Tape into place.
S T E P 2 4
Drill 1/8 inch holes as indicated on template.
S T E P 2 5
Install grille with short #8 screws and #8 flat washers as provided.
S T E P 2 6
Step backwards through steps 7- 1, installing side cargo panel, side threshold plate, rear seat belt bolt, rear threshold plate and floor as removed.
C O N G R A T U L A T I O N S !
You have completed the installation for this model!
Enjoy your new Stealthbox®!
Please refer to the Power Recommendation section for an amplifier recommendation and basic
Page 4 • JL Audio, Inc 2008 | Continued on Next Page |
