Cont.

From

Previous

Page

HEX NUT

 

➔ ➔

FLAT WASHER

 

TAP BOLT➔

➔

 

LOCK WASHER

FLAT WASHER

VEHICLE'S SHEET METAL

 

STEP 18: Place the supplied slotted mounting bar into mounting area.The bar will go behind the open- ing.

The slot needs to be facing up.

STEP 19: With the slotted mounting bar into posi- tion. Place a supplied 1/4”lock washer, 1/4” flat wash- er onto each supplied bolt.

Slide each assembly through the drilled hole and through the slotted mounting bar.

Place another flat washer and a hex nut onto each bolt. (As in picture above)

STEP 20: Replace the driver’s side rear cargo panel, rear belts, driver’s side rear door sill plate back inside the SUV from STEPs 5 - 11.

STEP 21: Run speaker wire from the amplifier location to the Stealthbox. Make sure that the speaker wire is running over the mounting bar.

Double check the woofer for proper operation.

➔ ➔ ➔

STEP 22: Place the supplied socket cup set screw into the Stealtbox.

Leaving about 1-1/2” exposed.

STEP 23(A): Under the driver’s side rear section of the SUV.You need to remove the black vent.

Place a large flat blade between the vent lip and the metal.There are two areas that have push clips. Push these clips with the flat blade and pop out the vent.

STEP 23(B): With the vent removed, this is going to allow access to the Stealthbox.

STEP 24: With help from a second person, place the Stealthbox into mounting area.

w w w . j l a u d i o . c o m

Continued on Next Page ➔

SB - N - ARMDA/10W6v2, JL AUDIO, Inc 2005

Pag e 4

Sheet SKU#011193 Revision 5/26/2005

Page 3 Page 5
Page 4
Image 4
JL Audio SB-N-ARMAD/10W6v2/GA, SB-N-ARMDA/10W6v2, SB-N-ARMAD/10W6v2/TN2, SB-N-ARMAD/10W6v2/DG2 manual Flat Washer TAP Bolt
Page 3 Page 5

SB-N-ARMAD/10W6v2/GA, SB-N-ARMAD/10W6v2/DG2, SB-N-ARMAD/10W6v2/TN2, SB-N-ARMAD/10W6v2, SB-N-ARMDA/10W6v2 specifications

JL Audio has long been a premier name in the audio industry, known for their high-quality sound systems that deliver an unparalleled listening experience. Among their standout offerings are the SB-N-ARMAD/10W6v2 and related models, specifically designed to integrate seamlessly into specific vehicle applications while providing exceptional bass performance.

One of the most notable features of the SB-N-ARMAD/10W6v2 is its custom-fit design, which ensures a perfect match with the interior of your vehicle, specifically targeting the Jeep Wrangler. This enclosure is built to fit snugly into the designated space without sacrificing any cargo area, making it a practical choice for those who value performance and utility. The enclosure is made from high-quality MDF and is finished with a rugged automotive-grade fabric, ensuring both durability and aesthetic appeal.

At the heart of this powered subwoofer setup lies the JL Audio 10W6v2 subwoofer, renowned for its ability to produce deep, rich bass tones. The 10W6v2 features a patented DMA (Dynamic Motor Analysis) technology, which optimizes the alignment of the voice coil and magnetic structure to minimize distortion, allowing for accurate sound reproduction even at higher volumes.

Additionally, the subwoofer is equipped with a large, aerodynamic port, which improves airflow and further enhances low-frequency output. This careful attention to design not only ensures powerful bass response but also maintains clarity across the entire sound spectrum.

The SB-N-ARMAD/10W6v2 models also incorporate advanced materials, including a polypropylene cone and rubber surround, which contribute to the subwoofer's overall performance and longevity. The subwoofer is designed to handle high power levels, ensuring that it can keep up with the demands of modern audio systems.

Furthermore, various model distinctions, such as the SB-N-ARMDA/10W6v2 and SB-N-ARMAD/10W6v2/TN2, reflect differences in finishes and specific vehicle compatibility, allowing consumers to select the right option that best suits their needs.

Overall, the JL Audio SB-N-ARMAD/10W6v2 and its related models represent a blend of innovative design, robust engineering, and superior sound quality. Their ability to deliver powerful bass in a compact, vehicle-specific package makes them an ideal choice for audiophiles seeking to enhance their listening experience in their cars while maintaining everyday practicality. Whether you're a casual listener or a serious audiophile, these subwoofers promise to elevate your audio experience to new heights.
Top Page Image Contents