4. Repeat steps 1 through 3 until all devices are installed, then move onto
step 5 to complete unit setup and installation.
5. Configure ID and other options as required. See Chapter 4 for Fibre
Channel device setup.
6. Install and configure SES and other optional features. See Chapter 8.
7. For rackmount units, refer to Chapter 7 to install the enclosure into a
cabinet.
8. Establish host connection. See Chapter 4 for Fibre Channel host
connection.
FORTRAFORCE4G15 & G15+ RAID System InstallationGuide Rev A 3-3