JMR electronic PUB-00281

4. Slide the unit into the cabinet and secure it to the cabinet with a single

#10-32 screw on each side.

5. Snap the end cap over the screw on each side of the unit to finish the

installation.

FORTRAFORCE4G15 & G15+ RAID System InstallationGuide Rev A 7-4

Contents

Main Page Table of Contents 1. Introduction 2. Hardware Specification 3. Device Installation 4. Fibre Channel JBOD Setup Table of Contents Page FORTRAProduct Family Features 1. Introduction Force FORTRA Force FORTRA G15 RAID System Components G15+ RAID System Components Rackmount Specifications Tower Specifications Fibre Channel Features Loop Expansion Loop Bypass and Clock Timing Circuit SFP CONNECTOR Page 2. Hardware Specification Environmental Specifications Electrical Specifications Agency Compliance Packaging Specifications Thermal Specifications Rotation Vibration Specifications Fault Indication Features Fault Indicators Audible Alert Page 3. Device Installation SCA Connection and Hot-Swapping Canister Removal/Insertion Drive Installation Page 4. Fibre Channel JBOD Setup Slot Settings Setting ID 1G Option Setting ID Conflict Option Settings Delayed Start Option Jumper Remote Start Option Jumper Front Status LEDs External I/O Connection CH-A and CH-B (Top) CH-A and CH-B (Bottom) System/SES Fault LED & Audible Alert Page 5. Blower Operation Blower Removal/Insertion Blower Replacement 6. Power Supply Operation Power Supply Removal/Insertion Low Power Mode (Standby Power) Power Supply Replacement 7. FR15 Cabinet Installation Rail Mounting Kit Hardware Spare Hardware Parts Rail Installation Page Page 8. SES Operation Installing the PCI Controller Configuring RAID Sets 9. Installing the Intel PCI RAID Controller 10. Product Support US Corporate Headquarters Manual Changes Drive Manufacturers RAID Controller Manufacturers Appendix A. DRIVE AND CONTROLLER M Host Bus Adapter Manufacturers