Programme information
Easy iron 40°
This programme at 40°C reduces creasing on synthetic garments and therefore reduces the amount of ironing required. The laundry is gently washed and spun to prevent the fabrics creasing.
Spin
Separate long spin at the max speed for hand washed garments. It automatically defaults to the setting for cotton items. You can reduce the speed by pressing the relevant button to adapt it to the fabrics to be spun.
Rinses
With this programme it is possible to rinse and spin garments which have been washed by hand. The machine performs 3 rinses, followed by a final long spin at the maximum speed.
Important!
The spin speed will automatically default to the setting for cotton items. If required, reduce the speed to the desired level by pressing the relevant button for other fabric types.
Drain
For emptying out the water with the “Rinse hold” option, if you want to change a programme due to a wrong selection and it is necessary to empty out the water.
Firstly, turn the programme selector dial to Off, then select the Drain programme and press the Start/Pause button.
Special features
Child lock 
The ‘Child Lock‘ feature will allow you to lock the controls while the machine is running to prevent tampering.
You can activate this device:
•Before starting the machine
•When the programme is running
Activate «Child Lock» by pressing the Spin and Automatic dry buttons simultaneously for 5 seconds until the padlock symbol 
is displayed on the screen.
To
45 Minute wash
This is a complete programme to be used for half load of slightly or normally soiled cotton items. This programme performs a good washing efficiency in a short time.
14 Minute wash
Suitable for laundry which is very lightly soiled or which needs freshening up.
Off = Reset / Switching the machine off
To reset a programme or switch the machine off, turn the selector dial to Off.
A new programme can now be selected.
padlock symbol 
on the screen disappears. «Child Lock» will remain activated until you de- activate it, even if the machine is turned off.
Buzzer
This appliance incorporates a buzzer, which sounds at the end of the cycle and if there is a fault.
To deactivate the acoustic signal (only at the end of cycle), press simultaneously for a few seconds the buttons Time dry and Prewash.
By pressing these 2 buttons again the acoustic signal is reactivated. .
16
