Stage 2

Attach 6 self-adhesive clear plastic
buffers to each shelf frame. Position
one buffer in each corner and one
centrally at the front and rear of the
frame as shown on the right.
Carefully place top glass shelf (8mm
glass) onto the 6 clear plastic buffers on
the top shelf frame. The black printed side
of the glass should be on the underside.
Carefully insert the two remaining glass
shelves (5mm glass) onto plastic
buffers on the remaining shelf frames.
Take extra care not to damage either the
legs or back panel during this stage.
Fully tighten all screws to secure
assembly.
•
•
•
•
k
d
e
m
Peel protective backing from
self-adhesive strips on cable tidy
clips .
Firmly attach cable tidy mouldings to
rear of back panel.
The mouldings can be simply ‘un-clipped’
to allow cable access and then ‘clipped’
back into place to keep the cables
captive.

Stage 3

•
•
•
3.
m
2.
k
e

x18

k
d