John Lewis JLBIOS664 To perform this operation correctly, pro- ceed as follows, b

10.Repeat the procedure described in point 9. for themiddlepanemarkedbyadecorativeframe on 4 sides (Fig. 8).

11.Gentlyliftandcarefullytakeofftheinnermostpane (Fig. 9).

Clean the oven door with lukewarm water and a soft cloth. Do not use products such as scouring pads, steel wool, abrasive sponges or acids be- cause they could damage the special heat-reflect- ing surface of the internal panes of glass.

After cleaning, reassemble the panes in the door and then the oven door, following the procedure described above in reverse. Make sure you reposition the panes correctly.

)To perform this operation correctly, pro- ceed as follows:

a)the clear innermost pane must be reassembled sothatthescreen-printedsymbolinonecorner is placed in the upper left-hand corner as shown in Fig. 10a.

Themiddlepanemustbeputbackintotheright seat as shown in Fig. 10b.

2

1

Fig. 8

2

1

Fig. 9

Fig. 10b

Fig. 10a

32