Conversion from Natural Gas to LPG

If the cooking appliance is set up for a different type of gas than that available, its injectors must be replaced, the minimum flow regulated. In order to replace the injectors in the cooking hob, it is necessary to carry out the following operations:

Fig. A

Fig. B

 

 

remove the pan supports;

remove the burners and burner caps (Fig. A);

take out the injector (Fig. B) and replace it with one suitable for the new type of gas (see "General injectors table");

replace the gas label (on the rear of the appliance) with the new one provided with the injectors kit;

refit all parts by following the disassembly instructions in reverse order and taking care to position the burner cap correctly on the burner.

Minimum flow of valved cooking hob taps

Switch on the burner and turn the control knob towards the minimum flow position ;

remove the knob;

using a screwdriver, adjust the internal screw Z until the correct low flame is obtained;

refit the knob.

=

Minimum flow of non-valved cooking hob taps

Switch on the burner and turn the control knob towards the minimum flow position ;

remove the knob;

insert a small screwdriver into the rod of the tap and adjust the internal screw Z until the correct low flame is obtained;

refit the knob.

=

Unscrew the adjustment screw Z to increase the flow, or tighten it to reduce the flow. The adjustment is correct when the low flame measures approximately 3 or 4 mm. When changing quickly from maximum to minimum flow and vice versa make sure that the flame does not go out.

Connecting to LPG

Use a pressure regulator and connect to the cylinder in compliance with the guidelines set out in standards regulations in force.

L.P.G. cookers MUST NOT be installed below ground level i.e. in a basement or aboard any boat, yacht or other vessel.

General injectors table

TYPE OF GAS

mBar

INJECTOR NO.

BURNERS

POWER Watts

MAX.

 

 

 

 

POSITION TYPE

 

 

CONSUMPTION

 

 

 

 

 

 

 

 

 

 

INJECTOR

BY-PASS

 

MAX.

MIN.

 

 

 

 

 

 

 

 

 

 

 

115

44 GAP

RAPID

3000

750

286 l/h

NATURAL

 

 

 

 

 

 

 

 

97

34 GAP

SEMI-RAPID

1750

440

167 l/h

GAS

20

 

 

 

 

 

 

72

27 GAP

SIMMER

1000

300

95 l/h

G20 (E)

 

 

 

 

 

 

 

 

128

60 GAP

TRIPLE RING (A)*

3300

1500

314 l/h

 

 

 

 

 

 

 

 

 

 

128

60 GAP

TRIPLE RING (D)*

3300

1500

314 l/h

 

 

 

 

 

 

 

 

LPG

 

85

44 GAP

RAPID

3000

750

219 g/h

BUTANE

 

 

 

 

 

 

 

 

65

34 GAP

SEMI-RAPID

1750

440

128 g/h

PROPANE

28-30/37

 

 

 

 

 

 

50

27 GAP

SIMMER

1000

300

73 g/h

G30/G31

 

 

 

 

 

 

 

 

93

60 GAP

TRIPLE RING (A)*

3300

1500

240 g/h

 

 

 

 

 

 

 

 

 

 

93

60 GAP

TRIPLE RING (D)*

3300

1500

240 g/h

* Position A: front left, position D: centre rear (see also "Description of the cooktop").

11

Page 11
Image 11
John Lewis JLRC101 instruction manual Conversion from Natural Gas to LPG

JLRC101 specifications

The John Lewis JLRC101 is an exceptional robotic vacuum cleaner that offers a blend of advanced technology and user-friendly design, making it a fantastic addition to any home. Renowned for its efficient cleaning capabilities, the JLRC101 is perfect for tackling dust, dirt, and pet hair, ensuring your floors remain spotless with minimal effort.

One of the standout features of the JLRC101 is its powerful suction technology. Equipped with a robust motor, this robotic vacuum can easily pick up debris from both hard floors and carpets. Its smart suction adjustment mechanism allows the vacuum to adapt its suction power based on the surface it’s cleaning, optimizing performance and battery life.

The JLRC101 also features advanced navigation technology, including a combination of LIDAR and infrared sensors. This enables the vacuum to create a detailed map of your home, allowing it to plan the most efficient cleaning route. It can navigate around furniture and avoid obstacles, ensuring a thorough clean without getting stuck. With a slim profile, the JLRC101 can easily access hard-to-reach areas, including under beds and couches.

Another impressive characteristic of the JLRC101 is its programmable scheduling feature. Users can set specific cleaning times, allowing the vacuum to operate automatically even when it's not in use. This is particularly convenient for busy households, as it ensures that cleaning is taken care of without supervision.

The JLRC101 comes with a user-friendly app that provides real-time monitoring and control. Users can start, stop, or schedule cleans directly from their smartphones, offering flexibility and convenience. The app also allows users to customize cleaning settings and receive notifications, enhancing the overall cleaning experience.

Battery life is another area where the JLRC101 excels. It features a high-capacity lithium-ion battery that provides long run times, ensuring that it can cover larger areas on a single charge. When the battery runs low, the JLRC101 can automatically return to its charging dock, ensuring it's always ready for the next cleaning session.

In summary, the John Lewis JLRC101 embodies cutting-edge cleaning technology, impressive suction power, advanced navigation, and user-friendly features. With its ability to adapt to various floor types, schedule cleaning sessions, and integrate with smart devices, the JLRC101 is designed to make your cleaning routine easier and more effective.