John Lewis JLRC101 Something Not Working

26
Something Not Working
If the appliance is not working correctly, please carry out
the following checks before contacting your local Service
Force agent.
IMPORTANT : If you call out an engineer to a
fault listed below, or to repair a fault caused
by incorrect use or installation, a charge will
be made even if the appliance is under
guarantee.
Symptom Solution
The ignition does not work: • The plug is not properly inserted in the power socket.
• There is no current at the socket.
The burner does not ignite: • The gas is turned off.
• There is no ignition spark.
The flame has no uniform distribution: • The burner plate is improperly assembled.
• The burner is dirty.
The inner lamp is not working: • The plug is not properly inserted in the power socket.
• There is no current at the socket.
• The lamp is defective.
The oven is not warming up: • The plug is not properly inserted in the power socket.
• There is no current at the socket.
The display light is blinking: • There has been a current interruption, the display needs to be
programmed again (see page 14).