Delay start, a time value indicated in hours (23 hours max) and selected by means of the relevant button.

Delay

start

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown is updated every hour, and, for the last two hours, every 30 minutes.

An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

An alarm code indicates a fault in the machine operation (see page 28, "Something Not Working")

10 Programme phase indicator lights

When you select a programme, the lights relevant to the phases that form the programme light up.

After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.

When the washing or drying programme has finished, the “End” light comes on and a flashing zero appears on the display. The light of the ‘Start/Pause is off.

Prewash

Wash

Rinse

Rinse hold

Drain

Spin

Drying

End

ATTENTION!

If you turn the programme selector dial to another programme when the machine is working, all the lights of the programme progress display will flash for about 2 seconds but the machine will not perform the new selected programme.

E20

14

Page 14
Image 14
John Lewis JLWD 1408 instruction manual Programme phase indicator lights