Jonsered LM2151 CMD, LM2147 CMD Description, Assembly of Grass Catcher, Adjustment of Handles

DESCRIPTION

1	Upper handles	12	Rear deflector
2	Fuel-enrichment pump	13	Throttle lever
3	Fastening knobs for upper handles	14	Engine stop lever
4	Grass catcher	15	Reduction gear
5	Oil filler cap	16	Ignition key
6	Oil drain plug	17	Handle advance speed
7	Deck	18	Clutch lever

8Adjusting levers for cutting height

9Spark plug

10Fuel cap

11Engine start-grip

ASSEMBLY OF GRASS CATCHER

ASSEMBLY deflector (if not already assembly)

ASSEMBLY HANDLES (lower)

ASSEMBLY HANDLES (upper)

ADJUSTMENT OF HANDLES

MULCHING CAP INSERTION (for the models where it is included only)

To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap by fixing it with the spring as shown in the figure.

ADJUSTMENT OF CUTTING HEIGHT

SAFETY PRECAUTIONS

 Always operate with the deflector or grasscatcher in the correct position.

 Always stop the engine before removing the grasscatcher or adjusting the height of cut.

 Never place your hands or feet underneath the deck or into the grass discharge chute while the engine is running.

Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed.

Never lift the rear of the mower while starting the engine or during normal operation.

Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.

ENGLISH - 3