Venting Requirements

The Jøtul GF100 Nordic QT gas stove may be installed with a vertical or horizontal termination and must conform to the configuration requirements described below.

This appliance is approved for use with vent systems from the following manufacturers:

•Simpson Dura-Vent GS

•Selkirk Metalbestos

•Security Vent Ltd.

•Amerivent Corporation

Use parts of one manufacturer only - DO NOT MIX VENT COMPONENTS FROM DIFFERENT MANUFACTURERS IN THE SAME SYSTEM.

Installation of any components not manufactured or approved by Jøtul or failure to meet all clearance require- ments will void all warranties and could result in prop- erty damage, bodily injury, or serious fire.

The approved vent configurations described in this manual are derived from extensive testing under con- trolled laboratory conditions. Gas appliance performance can be negatively affected by variables present in the installation environment, i.e: atmospheric pressure, strong prevailing winds, adjacent structures and trees, snow accumulation, etc. These conditions should be taken into consideration by the installer and stove owner when planning the vent system design.

IMPORTANT

Vent Restriction

The Nordic QT is shipped with an Exhaust Restrictor Plate which prevents overly strong draft that can cause poor combustion and weak flame picture. The Exhaust

Restrictor should be installed on any stove using a vertical termination or snorkel termination.

Additional restriction may be needed depending the overall vent height. Most vent manufacturer’s offer in- line vent restrictors that install between two pipe sections. Follow the vent manufacturer’s installation instructions.

Exhaust Restrictor Plate:

1.Remove the glass panel and log set.

2.Using a 1/4” nut driver, remove the two sheet metal screws in the rear wall of the firebox below the exhaust hole. See fig. 5.

3.Install the restrictor plate over the lower half of the exhaust hole and secure the plate using the same screws that were just removed.

4.Reinstall logs and glass.

•JOINT SEALING REQUIREMENT: APPLY A 1/8” BEAD OF HIGH- TEMPERATURE (750°F)

SEALANT TO THE MALE SECTION OF THE INNER VENT PIPE. THE CEMENT SHOULD FORM A SEAL BETWEEN THE INNER AND OUTER PIPES.

•NEVER MODIFY ANY VENTING COMPONENT, OR USE ANY DAMAGED VENTING PRODUCT.

SEALANT

Restrictor

Plate

1/4” Sheet

Metal Screws

Figure 5. Installing the Exhaust Restrictor Plate.

•THE GAS APPLIANCE AND VENT SYSTEM MUST BE VENTED DIRECTLY TO THE OUTSIDE OF THE BUILDING AND NEVER ATTACHED TO A CHIMNEY SERVING A SOLID FUEL OR GAS BURNING APPLIANCE. EACH DIRECT VENT GAS APPLIANCE MUST HAVE ITS OWN SEPARATE VENT SYSTEM. COMMON VENT SYSTEMS ARE PROHIBITED.

•IF VENTING SYSTEM IS DISASSEMBLED FOR ANY REASON, REINSTALL PER THE INSTRUCTIONS PROVIDED FOR THE INITIAL INSTALLATION.

8

Page 7 Page 9
Page 8
Image 8
Jotul GF100 DV manual Venting Requirements, Vent Restriction, Exhaust Restrictor Plate
Page 7 Page 9

GF100 DV specifications

The Jotul GF100 DV is a standout in the world of gas stoves, combining traditional design with modern technology to deliver both functionality and aesthetic appeal. It is a part of the prestigious Jotul lineup, known for its high-quality craftsmanship and reliability. One of the most notable features of the GF100 DV is its impressive heating capacity, designed to warm spaces effectively while maintaining an efficient burn.

This model boasts a striking cast iron construction which not only contributes to its durability but also enhances its visual appeal. The classic aesthetics of the GF100 DV allow it to blend seamlessly with various decor styles, from rustic to contemporary. The glass front provides a panoramic view of the flames, creating a warm and inviting ambiance in any room.

The Jotul GF100 DV incorporates advanced gas technology, featuring a direct vent system that ensures optimal efficiency. The direct vent design utilizes outside air for combustion, minimizing drafts and improving indoor air quality. This system allows for versatile installation options; it can be vented vertically or horizontally, making it suitable for a variety of home layouts.

Equipped with a variable flame adjustment feature, the GF100 DV enables users to control the heat output according to their needs. The adjustable thermostat allows for consistent temperature regulation, making it a convenient option for any household. Additionally, the remote control capability adds an element of convenience, allowing homeowners to adjust settings from anywhere in the room.

Furthermore, the Jotul GF100 DV is designed with an impressive efficiency rating, providing peace of mind that you are minimizing fuel consumption while maximizing heat output. This not only benefits the environment but also translates to cost savings on energy bills over time.

The stove is available in multiple finishes, allowing users to choose a look that best fits their home’s interior. Whether opting for traditional black or a more contemporary enamel finish, the Jotul GF100 DV remains a prominent feature in any living space.

In summary, the Jotul GF100 DV is a sophisticated gas stove that blends traditional design with cutting-edge technology. Its combination of aesthetics, efficient heating, and user-friendly features make it a top choice for homeowners seeking both beauty and performance in their heating solutions.
Top Page Image Contents