Attach the first hanging point at the upper edge of the
Netting (20) with the G3 Pole (18) to the Hemisphere Cap (19)
of Top enclosure pole(17). Attach a second hanging point directly across the Netting (20) from the first hanging point.
Attach the other two hanging point halfway between the first two hanging points, so four hanging points are attached as shown.
See insert drawing for attached of G3 Pole (18): Hemisphere Cap (19) has been attached to the top of the Top enclosure pole(17).
13.Note: During steps 14 and 15, you will “tie” the lower edge of the Netting(20) to the
Please see insert drawing a, b, c, d on next page.
12.a
Hanging Point1 | Hemisphere Cap(19) | Hanging Point2 |
|
Hanging Point3 
Hanging Point4
Netting(19)
Door of Netting
Attached Hanging Point:
Hemisphere Cap
(19)G3 Pole(18)
Top enclosure pole (17) 
Netting |
13 |
20 |
Strap |
20
