Jura Capresso 13637 products, Maintenance settings, ‘Water hardness’, Enabling and disabling

Permanent settings in programming mode

Enabling and disabling	In the program item ‘Product settings (/)’ / ‘Lock/enable’ you can
products	enable or disable each individual product.
	Example: For example, you can disable the preparation of hot water.
	Precondition: ‘Please select product:’ is displayed.
	O	T Press the P button.
		‘Maintenance status (/)’
	g	T Turn the Rotary Switch until the program item ‘Product set-
		tings (/)’ is displayed.
		T Press the ‘Lock/enable’ button.
		‘Lock/enable’
	E The lock symbol indicates whether the product is enabled or
		disabled. If the lock is closed, the product is disabled.
		T Press the ‘Next’ button until the product ‘Hot water’ is dis-
		played.
		T Press the ‘Hot water’ button.
		The lock is closed. Hot water preparation is now disabled.
	O	T Press the P button to exit programming mode.
		‘Please select product:’
		On the start screen, ‘Hot water’ is greyed out.
Maintenance settings	In the program item ‘Maintenance settings (/)’ you can make the
	following settings:
	U	‘Filter’
		U Activate the CLEARYL Pro Blue filter cartridge (see Chapter
	U	‘Maintenance – Inserting and activating the filter’).
		‘Water hardness’
		U If you do not have a filter cartridge, you will need to set the
		water hardness (see Chapter ‘Permanent settings in pro-
	U	gramming mode – Setting the water hardness’).
		‘Switch-on rinse’ / ‘Manual’
	U	U The switch-on rinse must be started manually.
		‘Switch-on rinse’ / ‘Automatic’
	U	U The switch-on rinse is started automatically.
		‘Rinse the milk system’ / ‘After min’

U You are prompted to rinse the milk system minutes after preparation of a specialty coffee with milk.